EGR A

Piston packing set, EGR-A



Properties

Application Hydraulics
Design Piston packing set
Media Mineral oils, Water emulsions
Material (1) Dynamic seal: PTBR, (2) Static seal: NBR
Installation on multi-part pistons B, on one-piece pistons A
Operating pressure up to 700 bar

Description

Low spatial requirement.
High extrusion resistance.
low break-loose torque and dynamic friction
Long service life.

Hints

Clearance:
E max: L= 2.2; 0-200 bar 0.25; 200-400 bar 0.15; 200-400 bar f7/H8
E max: L= 3.2-4.2; 0-200 bar 0.30; 200-400 bar 0.20; 200-400 bar f7/H8
E max: L= 6.3-8.1; 0-200 bar 0.40; 200-400 bar 0.25; 200-400 bar f7/H8
Tolerance: D= H9; d= h9; L= +0.2/0

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
EGR 0080 A554470 8 3,1 2,2
EGR 0100 A554470 10 5,1 2,2
EGR 0120 A554470 12 7,1 2,2
EGR 0150 A554470 15 7,5 3,2
EGR 0160 A554470 16 8,5 3,2
EGR 0200 A554470 20 12,5 3,2
EGR 0220 A554470 22 14,5 3,2
EGR 0240 A554470 24 16,5 3,2
EGR 0250 A554470 25 17,5 3,2
EGR 0280 A554470 28 20,5 3,2
EGR 0300 A554470 30 22,5 3,2
EGR 0320 A554470 32 24,5 3,2
EGR 0350 A554470 35 27,5 3,2
EGR 0360 A554470 36 28,5 3,2
EGR 0380 A554470 38 30,5 3,2
EGR 0400 A554470 40 29,0 4,2
EGR 0420 A554470 42 31,0 4,2
EGR 0440 A554470 44 33,0 4,2
EGR 0450 A554470 45 34,0 4,2
EGR 0480 A554470 48 37,0 4,2
EGR 0500 A554470 50 39,0 4,2
EGR 0520 A554470 52 41,0 4,2
EGR 0550 A554470 55 44,0 4,2
EGR 0560 A554470 56 45,0 4,2
EGR 0600 A554470 60 49,0 4,2
EGR 0600 B554470 60 44,9 6,3
EGR 0630 A554470 63 52,0 4,2
EGR 0650 A554470 65 54,0 4,2
EGR 0700 A554470 70 59,0 4,2
EGR 0750 A554470 75 64,0 4,2
EGR 0800 A554470 80 64,5 6,3
EGR 0850 A554470 85 69,5 6,3
EGR 0900 A554470 90 74,5 6,3
EGR 0950 A554470 95 79,5 6,3
EGR 1000 A554470 100 84,5 6,3
EGR 1050 A554470 105 89,5 6,3
EGR 1100 A554470 110 94,5 6,3
EGR 1150 A554470 115 99,5 6,3
EGR 1200 A554470 120 104,5 6,3
EGR 1250 A554470 125 109,5 6,3
EGR 1300 A554470 130 114,5 6,3
EGR 1350 A554470 135 114,0 8,1
EGR 1400 A554470 140 119,0 8,1
EGR 1450 A554470 145 124,0 8,1
EGR 1500 A554470 150 129,0 8,1
EGR 1550 A554470 155 134,0 8,1
EGR 1600 A554470 160 139,0 8,1
EGR 1650 A554470 185 144,0 8,1
EGR 1700 A554470 170 149,0 8,1
EGR 1800 A554470 180 159,0 8,1
EGR 1900 A554470 190 169,0 8,1
EGR 2000 A554470 200 179,0 8,1
EGR 2100 A554470 210 189,0 8,1
EGR 2200 A554470 220 199,0 8,1
EGR 2250 A554470 225 204,0 8,1
EGR 2300 A554470 230 209,0 8,1
EGR 2400 A554470 240 219,0 8,1
EGR 2500 A554470 250 229,0 8,1
EGR 2600 A554470 260 239,0 8,1
EGR 2700 A554470 270 249,0 8,1
EGR 2800 A554470 280 259,0 8,1
EGR 2900 A554470 290 269,0 8,1
EGR 3000 A554470 300 279,0 8,1
EGR 3200 A554470 320 299,0 8,1
EGR 3300 A554470 330 305,5 8,1
EGR 3500 A554470 350 325,5 8,1
EGR 3600 A554470 360 335,5 8,1
EGR 3700 A554470 370 345,5 8,1
EGR 3800 A554470 380 355,5 8,1
EGR 4000 A554470 400 375,5 8,1
EGR 4500 A554470 450 425,5 8,1
EGR 4800 A554470 480 455,5 8,1
EGR 5000 A554470 500 475,5 8,1

Order hints

We are able to produce seals with diameters of 20 to 510 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.