Piston packing set, EGRP

  • Image_1 Image_1
  • Image_2 Image_2


Installation on one-piece or multi-part pistons
Material (2) Static seal: NBR, Dynamic seal: PTFE
Max. operating pressure up to 700 bar
Media Mineral oil, Water emulsions
Sliding speed max. 0.5 m/s
Temp. max. 120 °C
Temp. min. -40 °C


Low spatial requirement.
High extrusion resistance.
Long service life.
low break-loose torque and dynamic friction

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
EGRP0400A554470 40 mm 24.5 mm 6.3 mm
EGRP0500A554470 50 mm 34.5 mm 6.3 mm
EGRP0600A554470 60 mm 44.5 mm 6.3 mm
EGRP0630A554470 63 mm 47.5 mm 6.3 mm
EGRP0650A554470 65 mm 49.5 mm 6.3 mm
EGRP0700A554470 70 mm 54.5 mm 6.3 mm
EGRP0800A554470 80 mm 59.0 mm 8.1 mm
EGRP0900A554470 90 mm 69.0 mm 8.1 mm
EGRP1000A554470 100 mm 79.0 mm 8.1 mm
EGRP1100A554470 110 mm 89.0 mm 8.1 mm
EGRP1200A554470 120 mm 99.0 mm 8.1 mm
EGRP1250A554470 125 mm 104.0 mm 8.1 mm
EGRP1300A554470 130 mm 109.0 mm 8.1 mm


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.