E-GTP

Piston guide E-GTP



Properties

Media Mineral oils
Material phenol resin-cotton fabric
Surface pressure 35 N/mm2
Installation insert into the groove

Description

Easy working of the fitting groove and assembly.
Low coefficient of friction.
High load-bearing capacity.

Hints

Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
EGTP 250 970 600 A 60 55 9,7
EGTP 250 970 700 A 70 65 9,7
EGTP 251 500 550 A 55 50 15,0
EGTP 251 500 750 A 75 70 15,0
EGTP 251 500 850 A 85 80 15,0
EGTP 251 500 900 A 90 85 15,0
EGTP 251 500 950 A 95 90 15,0
EGTP 251 501 200 A 120 115 15,0
EGTP 302 500 900 A 90 85 15,0
EGTP 302 501 000 A 100 94 25,0
EGTP 303 001 200 A 120 114 30,0
EGTP 303 001 500 A 150 144 30,0
EGTP 353 001 300 A 130 123 30,0
EGTP 353 501 400 A 140 133 35,0
EGTP 353 501 500 A 150 143 35,0
EGTP 501 501 000 A 100 90 15,0
EGTP 501 501 100 A 110 100 15,0
EGTP 501 501 200 A 120 110 15,0
EGTP 501 501 300 A 130 120 15,0
EGTP 501 501 500 A 150 140 15,0
EGTP 501 621 000 A 100 90 16,2
EGTP 501 621 100 A 110 100 16,2
EGTP 501 621 200 A 120 110 16,2
EGTP 501 621 300 A 130 120 16,2
EGTP 501 621 400 A 140 130 16,2
EGTP 501 621 500 A 150 140 16,2
EGTP 502 321 600 A 160 150 23,2
EGTP 502 321 800 A 180 170 23,2

Order hints

We are able to produce guide rings with diameters of 20 to 1,200 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.