Piston packing set for one-piece pistons EUD.P

  • Image_1 Image_1
  • Image_2 Image_2


Application Hydraulics
Design Piston packing set
Installation on one-piece pistons A
on multi-part pistons B
Material (1) Dynamic seal: PUR
(3) Guide ring: acetal resin
Max. operating pressure up to 400 bar
Media Mineral oil
Sliding speed max. 0.5 m/s
Temp. max. 80 °C
Temp. min. -30 °C


Extremely good sealing effect at low pressure.
Low spatial requirement.
Easy assembly.
Simple solution.
High abrasion resistance.

Article Table

Product Name D mm G mm P mm d mm L mm M mm
Product Name D mm G mm P mm d mm L mm M mm
EUD 32 24-P 32 4.00 31.0 24 10.0 29
EUD 40 32-P 40 4.00 39.0 32 10.0 37
EUD 50 40-P 50 4.00 49.0 40 12.5 47
EUD 63 53-P 63 4.00 62.0 53 12.5 60
EUD 80 70-P 80 4.00 79.0 70 12.5 77


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.