FE

Pump connection (4 hole)

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design Pump connection (4 hole)
Lieferumfang with screw set and O-ring
Material Steel ST 42.3
Mounting with metric screw set
Online-Shop https://shop.hansa-flex.com/de/FE
Surface electro galvanised

Hints

Der angeführte maximale Betriebsdruck ist bezogen auf den Flansch! Der tatsächliche Betriebsdruck wird bestimmt durch das Rohr (Wandstärke) sowie die Güte des Rohres!

Article Table

Product Name Druck PB bar D mm A LK mm G mm H mm Schrauben L mm Ø B mm OR
Product Name Druck PB bar D mm A LK mm G mm H mm Schrauben L mm Ø B mm OR
FE1 250 bar 45 mm G 1/2" -14 30 mm 55 mm 10 mm (4 x) M 6 x 20 6.5 mm 14 mm 18.77 x 1.78
FE2 250 bar 58 mm G 3/4" -14 40 mm 60 mm 12 mm (4 x) M 8 x 25 8.5 mm 19 mm 25.12 x 1.78
FE3A 250 bar 76 mm G 1" -11 51 mm 72 mm 16 mm (4 x) M 10 x 30 10.5 mm 24 mm 31.42 x 2.62
FE3B 250 bar 76 mm G 1" -11 56 mm 72 mm 16 mm (4 x) M 10 x 30 10.5 mm 24 mm 31.42 x 2.62
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.