FI BL FP

Tank venting filters

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design Flange mounting on the tank, with filler screen
Typ FI BL 080 F P10 003 lockable
Filter material non-organic
Material Chrome-plated steel, cork gasket
Temp. max. 100 °C
Temp. min. -25 °C

Article Table

Product Name Air volume l/min Tank bore Mounting C mm Ø A mm Ø E mm Bolt circle mm Ø D mm Filter mesh size µm Weight kg L mm B mm
Product Name Air volume l/min Tank bore Mounting C mm Ø A mm Ø E mm Bolt circle mm Ø D mm Filter mesh size µm Weight kg L mm B mm
FI BL 046 F P03 002 150 30 mm 3 x M5 46 46.00 28 41 52 3 0.10 64.0 110
FI BL 046 F P10 002 200 30 mm 3 x M5 46 46.00 28 41 52 10 0.10 64.0 110
FI BL 080 F P03 080 450 51 mm 6 x M5 61 80.00 50 73 83 3 0.33 80.0 141
FI BL 080 F P03 150 450 51 mm 6 x M5 61 80.00 50 73 83 3 0.33 150.0 211
FI BL 080 F P10 003 550 51 mm 6 x M5 61 80.00 50 73 83 10 0.33 80.0 141
FI BL 080 F P10 080 550 51 mm 6 x M5 61 80.00 50 73 83 10 0.33 80.0 141
FI BL 080 F P10 150 550 51 mm 6 x M5 61 80.00 50 73 83 10 0.33 150.0 211

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.