FI HD 400

High pressure filter 400bar

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design without bypass valve, without clogging indicator
Material Filter head of GGG
Max. operating pressure up to 400 bar
Scope of supply incl. filter element
Temp. max. 120 °C
Temp. min. -10 °C

Description

Pressure filter for pipeline installation
Pressure differential for filter element inorganic (A) max. 210 bar
Connector for clogging indicator M20 x 1.5 sealed with bolt

Hints

Dimension “L”: clearance required for changing the filter element

Article Table

Product Name Weight kg L1 mm L2 mm Ø A mm BD nom. bar AF mm Ø B mm G1 Filter area cm² L mm Q max. l/min Filter mesh size µm
Product Name Weight kg L1 mm L2 mm Ø A mm BD nom. bar AF mm Ø B mm G1 Filter area cm² L mm Q max. l/min Filter mesh size µm
FI HD 040 A06 N 001 G12 3.9 189.0 31.0 92.0 400 27 66.0 G 1/2" 470 80.0 40 6.0
FI HD 050 A10 N 001 G12 3.9 189.0 31.0 92.0 400 27 66.0 G 1/2" 470 80.0 50 10.0
FI HD 070 A06 N 001 G34 4.2 267.0 31.0 92.0 400 27 66.0 G 3/4" 900 80.0 70 6.0
FI HD 090 A10 N 001 G34 4.2 267.0 31.0 92.0 400 27 66.0 G 3/4" 900 80.0 90 10.0
FI HD 085 A06 N 001 G34 5.7 343.0 31.0 92.0 400 27 66.0 G 3/4" 1275 80.0 85 6.0
FI HD 100 A10 N 001 G34 5.7 343.0 31.0 92.0 400 27 66.0 G 3/4" 1275 80.0 100 10.0
FI HD 170 A06 N 001 G114 9.4 284.0 46.0 143.5 400 30 109.0 G 1.1/4" 2010 110.0 170 6.0
FI HD 150 A10V N 010 6.0 284.0 46.0 143.5 400 30 109.0 G 1.1/4" 2010 110.0 195 10.0
FI HD 260 A06 N 001 G114 16.5 409.0 46.0 143.5 400 30 109.0 G 1.1/4" 3800 110.0 260 6.0
FI HD 300 A10 N 001 G114 16.5 409.0 46.0 143.5 400 30 109.0 G 1.1/4" 3800 110.0 300 10.0
Qmax - max intake volumetric flow
A10 with inorganic filter (10 μm), absolute filtration
P10 paper filter (10 μm), nominal filtration
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.