FI HD E MP

Filter element for high-pressure filter MP

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Besondere Merkmale ∆p max. 20 bar
Material Gasket: NBR
Max. operating pressure max. 210 bar
Temp. max. 120 °C
Temp. min. -25 °C
Verwendung für Hochdruckfilter ohne Bypassventil

Article Table

Product Name Filtermaterial Qmax l/min Ø A mm Ø B mm Filterfläche cm² Gewicht kg L mm Filterfeinheit µm
Product Name Filtermaterial Qmax l/min Ø A mm Ø B mm Filterfläche cm² Gewicht kg L mm Filterfeinheit µm
FIHDEMP0078A10 inorganic 80 l/min 52.0 mm 24.0 mm 300 cm² 0.21 kg 76.5 mm 10.0 µm
FIHDEMP0086A05 inorganic 34 l/min 45.0 mm 25.4 mm 399 cm² 0.20 kg 86.0 mm 5.0 µm
FIHDEMP0086A10 inorganic 60 l/min 45.0 mm 25.4 mm 399 cm² 0.20 kg 86.0 mm 10.0 µm
FIHDEMP0114A05 inorganic 58 l/min 45.0 mm 25.4 mm 550 cm² 0.30 kg 114.0 mm 5.0 µm
FIHDEMP0114A10 inorganic 95 l/min 45.0 mm 25.4 mm 550 cm² 0.30 kg 114.0 mm 10.0 µm
FIHDEMP0210A05 inorganic 100 l/min 45.0 mm 25.4 mm 1069 cm² 0.42 kg 210.0 mm 5.0 µm
FIHDEMP0210A10 inorganic 100 l/min 45.0 mm 25.4 mm 1069 cm² 0.42 kg 210.0 mm 10.0 µm
FIHDEMP0234A05 inorganic 200 l/min 51.0 mm 27.1 mm 1672 cm² 0.60 kg 234.0 mm 5.0 µm
FIHDEMP0234A10 inorganic 200 l/min 51.0 mm 27.1 mm 1672 cm² 0.60 kg 234.0 mm 10.0 µm
FIHDEMP0236A05 inorganic 350 l/min 78.0 mm 40.2 mm 2943 cm² 1.30 kg 236.0 mm 5.0 µm
FIHDEMP0236A10 inorganic 350 l/min 78.0 mm 40.2 mm 2943 cm² 1.30 kg 236.0 mm 10.0 µm
Qmax - max intake volumetric flow

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.