FI MD 315

Medium pressure filter 315 bar

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design without bypass valve, without clogging indicator
Material Filter head of GGG
Max. operating pressure up to 315 bar
Scope of supply incl. filter element
Temp. max. 120 °C
Temp. min. -10 °C

Description

Pressure filter for pipeline installation
Pressure differential for filter element inorganic (A) max. 210 bar
Connector for clogging indicator M20 x 1.5 sealed with bolt

Hints

Dimension “L”: clearance required for changing the filter element

Article Table

Product Name L1 mm L2 mm Qmax l/min Ø A mm BD nom. bar AF mm Ø B mm G1 Filter area cm² Weight kg L mm Filter mesh size µm
Product Name L1 mm L2 mm Qmax l/min Ø A mm BD nom. bar AF mm Ø B mm G1 Filter area cm² Weight kg L mm Filter mesh size µm
FI MD 040 A06 N 001 G12 189.0 31.0 40 92.0 315 27 66.0 G 1/2" 425 3.90 80.0 6.0
FI MD 050 A10V N 010 189.0 31.0 50 92.0 315 27 66.0 G 1/2" 425 4.10 80.0 10.0
FI MD 060 A06 N 001 G34 267.0 31.0 60 92.0 315 27 66.0 G 3/4" 850 4.20 80.0 6.0
FI MD 080 A10V N 010 267.0 31.0 75 92.0 315 27 66.0 G 3/4" 850 5.15 80.0 10.0
FI MD 080 A06 N 001 G34 343.0 31.0 80 92.0 315 27 66.0 G 3/4" 1275 5.70 80.0 6.0
FI MD 090 A10 N 001 G34 343.0 31.0 90 92.0 315 27 66.0 G 3/4" 1275 5.70 80.0 10.0
FI MD 170 A06 N 001 G114 257.0 32.0 170 142.0 210 30 109.0 G 1.1/4" 2010 9.40 110.0 6.0
FI MD 190 A10 N 001 G114 257.0 32.0 190 142.0 210 30 109.0 G 1.1/4" 2010 9.40 110.0 10.0
FI MD 240 A06 N 001 G114 371.0 32.0 240 142.0 210 30 109.0 G 1.1/4" 3800 16.50 110.0 6.0
FI MD 260 A10 N 001 G114 371.0 32.0 260 142.0 210 30 109.0 G 1.1/4" 3800 16.50 110.0 10.0
Qmax - max intake volumetric flow
A10 with inorganic filter (10 μm), absolute filtration
P10 paper filter (10 μm), nominal filtration
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.