FI MD GEH

High pressure filter 400bar

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design without bypass valve, without clogging indicator
Material Filter head of GGG
Max. operating pressure up to 315 bar
Scope of supply without filter element
Temp. max. 120 °C
Temp. min. -10 °C

Description

Pressure filter for pipeline installation
Connector for clogging indicator M20 x 1.5 sealed with bolt

Hints

Dimension “L”: clearance required for changing the filter element

Article Table

Product Name L1 mm L2 mm Ø A mm BD nom. bar for filter type AF mm Ø B mm G1 Weight kg L mm
Product Name L1 mm L2 mm Ø A mm BD nom. bar for filter type AF mm Ø B mm G1 Weight kg L mm
FI MD GEH N 040 050 G12 189.0 31.0 92.0 315 FI MD 040, 050 27 66.0 G 1/2" 3.60 80.0
FI MD GEH N 060 075 G34 267.0 31.0 92.0 315 FI MD 060, 080 27 66.0 G 3/4" 3.90 80.0
FI MD GEH N 080 090 G34 343.0 31.0 92.0 315 FI MD 080, 090 27 66.0 G 3/4" 5.10 80.0
FI MD GEH N 170 190 G114 257.0 32.0 142.0 210 FI MD 170, 190 27 109.0 G 1.1/4" 8.50 110.0
FI MD GEH N 240 260 G114 371.0 32.0 142.0 210 FI MD 240, 260 30 109.0 G 1.1/4" 15.30 110.0
BD = Working pressure

Order hints

Filter element is not included. Please order separately.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.