FI ND E MA

Filter element for low-pressure filter MA

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Gasket: NBR
Max. operating pressure Max. 10 bar
Temp. max. 120 °C
Temp. min. -25 °C

Article Table

Product Name Filter material Qmax l/min Ø A mm Ø B mm Filter area cm² Weight kg L mm Filter mesh size µm
Product Name Filter material Qmax l/min Ø A mm Ø B mm Filter area cm² Weight kg L mm Filter mesh size µm
FI ND E MA 0093 A03 inorganic 15 47.0 25.5 590 0.20 93.0 3.0
FI ND E MA 0030 P25 organic 80 58.0 32.2 1824 0.27 178.0 25.0
FI ND E MA 0025 M60 wire mesh 150 83.2 47.5 1575 0.52 142.0 60.0
FI ND E MA 0050 A03 inorganic 200 78.5 40.3 4020 0.72 249.0 3.0
FI ND E MA 0050 A06 inorganic 200 78.5 40.3 4020 0.72 249.0 6.0
FI ND E MA 0050 A10 inorganic 200 78.5 40.3 4020 0.72 249.0 10.0
FI ND E MA 0060 M100 wire mesh 300 83.2 47.5 4280 0.98 265.5 100.0
FI ND E MA 0040 M60 wire mesh 330 140.0 51.0 2000 0.79 210.0 60.0
FI ND E MA 0045 P03 organic 350 152.0 88.0 10000 0.60 221.5 3.0
FI ND E MA 0100 M40 wire mesh 450 83.2 47.5 6370 0.98 372.0 40.0
FI ND E MA 0100 M60 wire mesh 450 83.2 47.5 4410 1.42 372.0 60.0
FI ND E MA 0463 A03 inorganic 350 106.0 72.0 10650 0.95 463.0 3.0
FI ND E MA 0463 A06 inorganic 400 106.0 72.0 10650 0.95 463.0 6.0
FI ND E MA 0463 A10 inorganic 450 106.0 72.0 10650 0.95 463.0 10.0
Qmax - max intake volumetric flow
Filter FI ND E MA 0050 *** für Bypass flow filter system NSFA Typ D
Filter FI ND E MA 0463 *** für Bypass flow filter system NSFA Typ E

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.