FI RL E MP

Filter element for return filter MP

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Gasket: NBR
Temp. max. 120 °C
Temp. min. -25 °C
Verwendung For return flow filter FI RL

Description

Pressure differential for filter element paper (P) max. 3 bar
Pressure differential for inorganic filter element (A) max. 10 bar

Article Table

Product Name Filtermaterial Bypassventil Qmax l/min für Filtertyp Ø B mm Ø A mm Filterfläche cm² Gewicht kg Filterfeinheit µm L mm
Product Name Filtermaterial Bypassventil Qmax l/min für Filtertyp Ø B mm Ø A mm Filterfläche cm² Gewicht kg Filterfeinheit µm L mm
FIRLEMP0072A10 inorganic with 25 l/min FI RL 024, 048 24.5 mm 52 mm 313 cm² 0.16 kg 10.0 µm 72.00 mm
FIRLEMP0072P10 organic with 25 l/min FI RL 024, 048 24.5 mm 52 mm 392 cm² 0.16 kg 10.0 µm 72.00 mm
FIRLEMP0085A10 inorganic with 100 l/min FI RL 053, 086 29.5 mm 70 mm 690 cm² 0.20 kg 10.0 µm 85.00 mm
FIRLEMP0085P10 organic with 100 l/min FI RL 053, 086 29.5 mm 70 mm 828 cm² 0.16 kg 10.0 µm 85.00 mm
FIRLEMP0130A10 inorganic with 100 l/min FI RL 064, 150 29.5 mm 70 mm 1140 cm² 0.22 kg 10.0 µm 130.00 mm
FIRLEMP0130P10 organic with 100 l/min FI RL 064, 150 29.5 mm 70 mm 1368 cm² 0.22 kg 10.0 µm 130.00 mm
FIRLEMP0145A10 inorganic with 600 l/min FI RL 290, 370 51.5 mm 130 mm 3600 cm² 1.00 kg 10.0 µm 145.00 mm
FIRLEMP0145P10 organic with 600 l/min FI RL 290, 370 51.5 mm 130 mm 4000 cm² 1.00 kg 10.0 µm 145.00 mm
FIRLEMP0204A10 inorganic with 300 l/min FI RL 320, 450 64.5 mm 130 mm 5299 cm² 1.00 kg 10.0 µm 204.00 mm
FIRLEMP0204P10 organic with 300 l/min FI RL 320, 450 64.5 mm 130 mm 5888 cm² 1.00 kg 10.0 µm 204.00 mm
FIRLEMP0211A10 inorganic with 150 l/min FI RL 125, 225 40.5 mm 70 mm 1358 cm² 0.28 kg 10.0 µm 211.50 mm
FIRLEMP0211P10 organic with 150 l/min FI RL 125, 225 40.5 mm 70 mm 1629 cm² 0.28 kg 10.0 µm 211.50 mm
FIRLEMP0220A10 inorganic with 250 l/min FI RL 190, 230 40.5 mm 99 mm 3360 cm² 0.70 kg 10.0 µm 220.00 mm
FIRLEMP0220P10 organic with 250 l/min FI RL 190, 230 40.5 mm 99 mm 3840 cm² 0.70 kg 10.0 µm 220.00 mm
FIRLEMP0254A10 inorganic with 380 l/min FI RL 420, 540, 675 64.5 mm 130 mm 6739 cm² 1.19 kg 10.0 µm 254.00 mm
FIRLEMP0254P10 organic with 380 l/min FI RL 420, 540, 675 64.5 mm 130 mm 7488 cm² 1.19 kg 10.0 µm 254.00 mm
FIRLEMP0404A10 inorganic with 600 l/min FI RL 620, 750 64.5 mm 130 mm 11059 cm² 2.00 kg 10.0 µm 404.00 mm
FIRLEMP0404P10 organic with 600 l/min FI RL 620, 750 64.5 mm 130 mm 12288 cm² 2.00 kg 10.0 µm 404.00 mm
FIRLEMP0050A25 inorganic with 100 l/min FI RL 064, 150 29.5 mm 70 mm 1140 cm² 0.28 kg 25.0 µm 130.00 mm
FIRLEMP0050P25 organic with 100 l/min FI RL 064, 150 29.5 mm 70 mm 1368 cm² 0.16 kg 25.0 µm 130.00 mm
FIRLEMP0120A25 inorganic without 300 l/min - 51.5 mm 99 mm 3259 cm² 0.53 kg 25.0 µm 210.00 mm
FIRLEMP0200A25 inorganic without 600 l/min - 76.0 mm 130 mm 11325 cm² 0.50 kg 25.0 µm 500.00 mm
Qmax - max intake volumetric flow

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.