FI SG E MP

Filter element for suction filter MP

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design without bypass valve
Filter material Wire mesh
Material Gasket: NBR
Max. operating pressure Max. 12 bar
Temp. max. 110 °C
Temp. min. -25 °C

Description

These filters protect hydraulic pumps from coarse dirt from the tank. They are flush-mounted the tank.

Article Table

Product Name Qmax l/min AF mm Ø B mm G1 Filter area cm² Filter mesh size µm Weight kg L mm
Product Name Qmax l/min AF mm Ø B mm G1 Filter area cm² Filter mesh size µm Weight kg L mm
FI SG E MP 0078 M90 20 30 52.0 G 3/8" 290 90 0.16 79.0
FI SG E MP 0078 M90 1/2 28 30 52.0 G 1/2" 290 90 0.16 79.0
FI SG E MP 0095 M90 1/2 28 41 70.0 G 1/2" 470 90 0.16 95.0
FI SG E MP 0095 M90 3/4 66 41 70.0 G 3/4" 470 90 0.22 95.0
FI SG E MP 0135 M90 11/4 170 69 99.0 G 1.1/4" 1046 90 0.47 137.0
FI SG E MP 0135 M90 11/2 170 69 99.0 G 1.1/2" 1046 90 0.47 137.0
FI SG E MP 0140 M90 3/4 66 41 70.0 G 3/4" 720 90 0.30 141.0
FI SG E MP 0140 M90 1 130 41 70.0 G 1" 720 90 0.30 141.0
FI SG E MP 0140 M250 1 900 41 70.0 G 1" 720 250 0.30 141.0
FI SG E MP 0140 M90 11/2 250 70 130.0 G 1.1/2" 2000 90 0.84 160.0
FI SG E MP 0140 M90 2 470 70 130.0 G 2" 2000 90 0.84 160.0
FI SG E MP 0225 M90 11/4 170 69 99.0 G 1.1/4" 1850 90 0.68 227.0
FI SG E MP 0225 M90 11/2 250 69 99.0 G 1.1/2" 1850 90 0.68 227.0
FI SG E MP 0225 M90 2 470 69 99.0 G 2" 1850 90 0.68 227.0
FI SG E MP 0262 M90 2 470 69 130.0 G 2" 3550 90 1.25 262.0
FI SG E MP 0270 M90 21/2 840 101 130.0 G 2.1/2" -11 3550 90 1.25 272.0
FI SG E MP 0270 M90 3 980 101 130.0 G 3" -11 3620 90 1.25 272.0
FI SG E MP 0330 M90 3 980 101 130.0 G 3" -11 4160 90 1.30 330.0
Qmax - max intake volumetric flow

Order hints

Available on request: Other filter mesh sizes, other threads, filter with bypass or magnet

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.