FI SP R 2

Spin-on return flow filter type 2



Properties

Design as return filter, with bypass valve 1.75 bar, without clogging indicator
Material Filter head in aluminum, Gasket: NBR
Operating pressure max. 12 bar

Description

Spin-on filters for pipeline installation
Pressure differential for paper filter element (P) max. 4 bar
Pressure differential for filter inorganic element (A) max. 4 bar
Design (Qmax.) for medium ISO VG 46
at 50°C (30 mm2/s) at Δptot = 0.4 bar

Hints

For utilization as a suction filter a suction filter head FI SP S FK *** must be used.

Article Table

Product Name Filter area Filter material Line connection Q max. L/min A mm C mm D mm E mm Weight kg
Product Name Filter area Filter material Line connection Q max. L/min A mm C mm D mm E mm Weight kg
FI SP R 215 A10 V G11/2 2 x 3160 cm2 inorganic G 1.1/2” 220 216 241 140 129 4,0
FI SP R 280 P10 V G11/2 2 x 4300 cm2 organic G 1.1/2” 282 216 241 140 129 4,0
FI SP R 250 A10 V G11/2 2 x 5390 cm2 inorganic G 1.1/2” 250 261 286 140 129 4,2
FI SP R 290 P10 V G11/2 2 x 5760 cm2 organic G 1.1/2” 293 261 286 140 129 4,2
Qmax - max intake volumetric flow

Order hints

Other filter materials and filters for other types of oil, viscosities or temperatures available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.