Seal for SAE and ISO flanges

  • Image_1 Image_1
  • Image_2 Image_2


Material Polyurethane 93 Shore A
Max. operating pressure up to 500 bar
Media Mineral oil
Temp. max. 120 °C
Temp. min. -40 °C

Article Table

Product Name d1 mm Flange size d2 mm S mm
Product Name d1 mm Flange size d2 mm S mm
FS-08 18.40 1/2" 25.40 3.53
FS-12 24.80 3/4" 31.80 3.53
FS-16 32.70 1" 39.70 3.53
FS-20 37.50 1.1/4" 44.50 3.53
FS-24 46.80 1.1/2" 53.80 3.53
FS-32 56.40 2" 63.40 3.53
FS-40 69.40 2.1/2" 76.20 3.53
FS-48 85.30 3" 91.90 3.53


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.