G AN HN

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT nut thread (NPSM)
Connection 2 NPT-external threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 60° outer cone
Sealing form 2 thread seal
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1
Product Name G2 S1 AF mm G1
G AN 02 HN 1/8" -27 NPT 14 14 1/8" -27 NPT
G AN 04 HN 1/4" -18 NPT 18 18 1/4" -18 NPT
G AN 04 HN 02 1/8" -27 NPT 18 16 1/4" -18 NPT
G AN 04 HN 06 3/8" -18 NPT 18 18 1/4" -18 NPT
G AN 06 HN 3/8" -18 NPT 22 22 3/8" -18 NPT
G AN 06 HN 04 1/4" -18 NPT 22 21 3/8" -18 NPT
G AN 06 HN 08 1/2" -14 NPT 22 22 3/8" -18 NPT
G AN 08 HN 1/2" -14 NPT 25 25 1/2" -14 NPT
G AN 08 HN 04 1/4" -18 NPT 25 24 1/2" -14 NPT
G AN 08 HN 06 3/8" -18 NPT 25 24 1/2" -14 NPT
G AN 08 HN 12 3/4" -14 NPT 25 29 1/2" -14 NPT
G AN 12 HN 3/4" -14 NPT 32 32 3/4" -14 NPT
G AN 12 HN 08 1/2" -14 NPT 32 32 3/4" -14 NPT
G AN 12 HN 16 1" -11.5 NPT 38 35 3/4" -14 NPT
G AN 16 HN 1" -11.5 NPT 38 38 1" -11.5 NPT
G AN 16 HN 12 3/4" -14 NPT 38 38 1" -11.5 NPT
G AN 20 HN 1.1/4" -11.5 NPT 48 48 1.1/4" -11.5 NPT
G AN 24 HN 16 1" -11.5 NPT 54 45 1.1/2" -11.5 NPT
G AN 24 HN 1.1/2" -11.5 NPT 54 54 1.1/2" -11.5 NPT
G AN 32 HN 2" -11.5 NPT 67 67 2" -11.5 NPT
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.