You are here:

Back to overview « Back to overview

G AN IN

Screw-on socket

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT nut thread (NPSM)
Connection 2 NPT internal thread
Construction straight
Design Screw-on socket
Material Steel
Sealing form 1 60° outer cone
Sealing form 2 thread seal
Surface electro galvanised

Article Table

Product Name G2 S1 SW mm G1
Product Name G2 S1 SW mm G1
GAN02IN 1/8" -27 NPT 14 14 mm 1/8" -27 NPT
GAN04IN 1/4" -18 NPT 18 18 mm 1/4" -18 NPT
GAN06IN 3/8" -18 NPT 22 22 mm 3/8" -18 NPT
GAN06IN04 1/4" -18 NPT 22 22 mm 3/8" -18 NPT
GAN08IN06 3/8" -18 NPT 22 25 mm 1/2" -14 NPT
GAN08IN 1/2" -14 NPT 25 25 mm 1/2" -14 NPT
GAN08IN12 3/4" -14 NPT 25 32 mm 1/2" -14 NPT
GAN12IN 3/4" -14 NPT 32 32 mm 3/4" -14 NPT
GAN16IN 1" -11.5 NPT 38 38 mm 1" -11.5 NPT
GAN20IN 1.1/4" -11.5 NPT 48 48 mm 1.1/4" -11.5 NPT
GAN24IN 1.1/2" -11.5 NPT 54 54 mm 1.1/2" -11.5 NPT
GAN32IN 2" -11.5 NPT 67 67 mm 2" -11.5 NPT
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.

SSL
© HANSA-FLEX 2018