GAR ABS

Wiper GA-R

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics
Design Wipers
Installation is pressed into an open groove
Material (1) Sleeve: Steel, (2) Wiper: NBR 90° Shore A
Media Mineral oil, Water emulsions
Online-Shop https://shop.hansa-flex.com/de/GARABS
Sliding speed max. 0.5 m/s
Temp. max. 100 °C
Temp. min. -30 °C

Description

Low spatial requirement.
No penetration of dirt via the outer metal ring.
Simple solution.

Article Table

Product Name H mm D mm d mm L mm
Product Name H mm D mm d mm L mm
GA1218-3-R 5.0 mm 18.0 mm 12 mm 3.5 mm
GA1420-3-R 5.0 mm 20.0 mm 14 mm 3.5 mm
GA1521-3-R 5.0 mm 21.0 mm 15 mm 3.5 mm
GA1622-3-R 5.0 mm 22.0 mm 16 mm 3.5 mm
GA1828-5-R 7.0 mm 28.0 mm 18 mm 5.0 mm
GA2030-5-R 7.0 mm 30.0 mm 20 mm 5.0 mm
GA2232-5-R 7.0 mm 32.0 mm 22 mm 5.0 mm
GA2535-5-R 7.0 mm 35.0 mm 25 mm 5.0 mm
GA2838-5-R 7.0 mm 38.0 mm 28 mm 5.0 mm
GA3040-5-R 7.0 mm 40.0 mm 30 mm 5.0 mm
GA3040-7-R 10.0 mm 40.0 mm 30 mm 7.0 mm
GA3242-5-R 7.0 mm 42.0 mm 32 mm 5.0 mm
GA3646-5-R 7.0 mm 46.0 mm 36 mm 5.0 mm
GA4050-5-R 8.0 mm 50.0 mm 40 mm 5.0 mm
GA4252-5-R 7.0 mm 52.0 mm 42 mm 5.0 mm
GA4555-5-R 7.0 mm 55.0 mm 45 mm 5.0 mm
GA5060-5-R 7.0 mm 60.0 mm 50 mm 5.0 mm
GA5565-5-R 7.0 mm 65.0 mm 55 mm 5.0 mm
GA5666-5-R 7.0 mm 66.0 mm 56 mm 5.0 mm
GA6070-5-R 7.0 mm 70.0 mm 60 mm 5.0 mm
GA6373-5-R 7.0 mm 73.0 mm 63 mm 5.0 mm
GA6575-5-R 7.0 mm 75.0 mm 65 mm 5.0 mm
GA7080-5-R 7.0 mm 80.0 mm 70 mm 5.0 mm
GA7583-7-R 10.0 mm 83.0 mm 75 mm 7.0 mm
GA8088-7-R 10.0 mm 88.0 mm 80 mm 7.0 mm
GA8090-7-R 10.0 mm 90.0 mm 80 mm 7.0 mm

Order hints

Anderer Werkstoff möglich: FPM, Bei besonderen Betriebsbedingungen (Flüssigkeit, Temperatur, Druck ...) wenden Sie sich bitte an uns.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.