GD (3000 / 6000 PSI)

SAE block flange, angle 90°



Properties

Design SAE block flange
Construction Angle 90°
Mounting Inner thread for metric screws
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name Pressure series PB 10.9 bar Size Ø B mm C mm D mm E1 mm E2 mm F mm G mm L mm S1 mm S2 mm M metr.
Product Name Pressure series PB 10.9 bar Size Ø B mm C mm D mm E1 mm E2 mm F mm G mm L mm S1 mm S2 mm M metr.
GD 304 3000 PSI 250 1.1/4" 32 58,7 82 30,2 30,2 82 80 13,0 39 38 M 10
GD 305 3000 PSI 200 1.1/2" 38 69,9 98 35,7 35,7 92 92 13,5 51 59 M 12
GD 306 3000 PSI 200 2" 46 77,8 102 42,9 42,9 85 87 14,0 51 48 M 12
GD 602 6000 PSI 400 3/4" 19 50,8 72 23,8 23,8 60 55 11,0 32 36 M 10
GD 603 6000 PSI 400 1" 23 57,2 82 27,8 27,8 68 64 14,0 37 40 M 12
GD 604 6000 PSI 400 1.1/4" 30 66,7 96 31,8 31,8 76 72 16,0 41 46 M 14
GD 605 6000 PSI 400 1.1/2" 38 79,4 114 36,5 36,5 86 89 18,0 50 52 M 16
GD 606 6000 PSI 400 2" 50 96,8 133 44,5 44,5 110 105 21,0 59 70 M 20
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.