GE HMED HJ

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 UN/UNF external threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 Shape E
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 AF mm G1
Product Name G2 AF mm G1
GE HMED 10 HJ 04 7/16" -20 UN 14 M 10 x 1
GE HMED 12 HJ 05 1/2"-20 UNF 17 M 12 x 1,5
GE HMED 12 HJ 06 9/16"-18 UNF 17 M 12 x 1,5
GE HMED 14 HJ 06 9/16"-18 UNF 19 M 14 x 1.5
GE HMED 16 HJ 06 9/16"-18 UNF 22 M 16 x 1.5
GE HMED 16 HJ 08 3/4" -16 UNF 22 M 16 x 1.5
GE HMED 18 HJ 08 3/4" -16 UNF 24 M 18 x 1.5
GE HMED 18 HJ 10 7/8" -14 UNF 24 M 18 x 1.5
GE HMED 22 HJ 10 7/8" -14 UNF 27 M 22 x 1.5
GE HMED 22 HJ 12 1.1/16" -12 UN 27 M 22 x 1.5
GE HMED 27 HJ 12 1.1/16" -12 UN 32 M 27 x 2
GE HMED 33 HJ 16 1.5/16" -12 UN 41 M 33 x 2
GE HMED 42HJ 20 1.5/8" -12 UN 50 M 42 x 2
GE HMED 48 H J24 1.7/8" -12 UN 55 M 48 x 2
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.