GE HMO AJ

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 UN/UNF nut threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 74° inner cone
Surface electro galvanised

Article Table

Product Name G2 S1 SW mm G1 OR
Product Name G2 S1 SW mm G1 OR
GEHMO10AJ04 7/16"-20 UNF 16 14 mm M 10 x 1 8.2 x 1.5
GEHMO10AJ05 1/2"-20 UNF 17 14 mm M 10 x 1 8.2 x 1.5
GEHMO12AJ04 7/16"-20 UNF 16 17 mm M 12 x 1,5 9.4 x 2.1
GEHMO12AJ05 1/2"-20 UNF 17 17 mm M 12 x 1,5 9.4 x 2.1
GEHMO14AJ05 1/2"-20 UNF 17 19 mm M 14 x 1.5 11.4 x 2.1
GEHMO14AJ06 9/16"-18 UNF 19 19 mm M 14 x 1.5 11.4 x 2.1
GEHMO16AJ06 9/16"-18 UNF 19 22 mm M 16 x 1.5 13.4 x 2.1
GEHMO16AJ08 3/4" -16 UNF 22 22 mm M 16 x 1.5 13.4 x 2.1
GEHMO18AJ08 3/4" -16 UNF 22 24 mm M 18 x 1.5 15.4 x 2.1
GEHMO18AJ10 7/8" -14 UNF 27 24 mm M 18 x 1.5 15.4 x 2.1
GEHMO22AJ10 7/8" -14 UNF 27 27 mm M 22 x 1.5 19.4 x 2.1
GEHMO22AJ12 1.1/16" -12 UN 32 27 mm M 22 x 1.5 19.4 x 2.1
GEHMO27AJ12 1.1/16" -12 UN 32 32 mm M 27 x 2 23.7 x 2.8
GEHMO27AJ16 1.5/16" -12 UN 38 32 mm M 27 x 2 23.7 x 2.8
GEHMO33AJ16 1.5/16" -12 UN 38 41 mm M 33 x 2 29.7 x 2.8
GEHMO42AJ20 1.5/8" -12 UN 50 50 mm M 42 x 2 38.7 x 2.8
GEHMO48AJ24 1.7/8" -12 UN 60 60 mm M 48 x 2 46.7 x 2.8
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.