GE HMO HJOF

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 ORFS external threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name OR2 G2 OR1 SW mm G1
Product Name OR2 G2 OR1 SW mm G1
GEHMO10HJOF04 7.65 x 1.78 9/16"-18 UNF 8.2 x 1.5 17 mm M 10 x 1
GEHMO12HJOF04 7.65 x 1.78 9/16"-18 UNF 9.4 x 2.1 17 mm M 12 x 1,5
GEHMO14HJOF06 9.25 x 1.78 11/16" -16 UN 11.4 x 2.1 19 mm M 14 x 1.5
GEHMO16HJOF06 9.25 x 1.78 11/16" -16 UN 13.4 x 2.1 22 mm M 16 x 1.5
GEHMO18HJOF06 9.25 x 1.78 11/16" -16 UN 15.4 x 2.1 24 mm M 18 x 1.5
GEHMO18HJOF08 12.42 x 1.78 13/16" -16 UN 15.4 x 2.1 24 mm M 18 x 1.5
GEHMO18HJOF10 23.52 x 1.78 1" -14 UNS 15.4 x 2.1 27 mm M 18 x 1.5
GEHMO22HJOF08 12.42 x 1.78 13/16" -16 UN 19.4 x 2.1 27 mm M 22 x 1.5
GEHMO22HJOF10 15.60 x 1.78 1" -14 UNS 19.4 x 2.1 27 mm M 22 x 1.5
GEHMO22HJOF12 18.77 x 1.78 1.3/16" -12 UN 19.4 x 2.1 32 mm M 22 x 1.5
GEHMO27HJOF10 15.60 x 1.78 1" -14 UNS 23.7 x 2.8 32 mm M 27 x 2
GEHMO27HJOF12 18.77 x 1.78 1.3/16" -12 UN 23.7 x 2.8 32 mm M 27 x 2
GEHMO33HJOF12 18.77 x 1.78 1.3/16" -12 UN 29.7 x 2.8 41 mm M 33 x 2
GEHMO33HJOF16 23.52 x 1.78 1.7/16" -12 UN 29.7 x 2.8 41 mm M 33 x 2
GEHMO33HJOF20 29.87 x 1.78 1.11/16" -12 UN 29.7 x 2.8 46 mm M 33 x 2
GEHMO42HJOF16 23.52 x 1.78 1.7/8" -12 UN 38.7 x 2.8 50 mm M 42 x 2
GEHMO42HJOF20 29.87 x 1.78 1.11/16" -12 UN 38.7 x 2.8 50 mm M 42 x 2
GEHMO48HJOF20 29.87 x 1.78 1.11/16" -12 UN 46.7 x 2.8 55 mm M 48 x 2
GEHMO48HJOF24 37.82 x 1.78 2" -12 UN 46.7 x 2.8 55 mm M 48 x 2
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.