GE HMOK AJ

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 UN/UNF nut threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 O-ring and spacer diaphragm ring
Sealing form 2 74° inner cone
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1 OR
Product Name G2 S1 AF mm G1 OR
GE HMOK 10 AJ 04 7/16"-20 UNF 16 14 M 10 x 1 8.0 x 1.5
GE HMOK 10 AJ 05 1/2"-20 UNF 17 14 M 10 x 1 8.0 x 1.5
GE HMOK 12 AJ 04 7/16"-20 UNF 16 17 M 12 x 1,5 9.3 x 2.4
GE HMOK 12 AJ 05 1/2"-20 UNF 17 17 M 12 x 1,5 9.3 x 2.4
GE HMOK 14 AJ 05 1/2"-20 UNF 17 19 M 14 x 1.5 11.3 x 2.4
GE HMOK 14 AJ 06 9/16"-18 UNF 19 19 M 14 x 1.5 11.3 x 2.4
GE HMOK 16 AJ 06 9/16"-18 UNF 19 22 M 16 x 1.5 13.3 x 2.4
GE HMOK 16 AJ 08 3/4" -16 UNF 22 22 M 16 x 1.5 13.3 x 2.4
GE HMOK 18 AJ 08 3/4" -16 UNF 22 24 M 18 x 1.5 15.3 x 2.4
GE HMOK 18 AJ 10 7/8" -14 UNF 27 24 M 18 x 1.5 15.3 x 2.4
GE HMOK 20 AJ 10 7/8" -14 UNF 27 27 M 20 x 1.5 17.3 x 2.4
GE HMOK 22 AJ 10 7/8" -14 UNF 27 27 M 22 x 1.5 19.3 x 2.4
GE HMOK 22 AJ 12 1.1/16" -12 UN 32 27 M 22 x 1.5 19.3 x 2.4
GE HMOK 26 AJ 14 1.3/16" -12 UN 36 36 M 26 x 1.5 23.5 x 2.6
GE HMOK 27 AJ 12 1.1/16" -12 UN 32 32 M 27 x 2 23.6 x 2.9
GE HMOK 27 AJ 16 1.5/16" -12 UN 38 32 M 27 x 2 23.6 x 2.9
GE HMOK 33 AJ 16 1.5/16" -12 UN 38 41 M 33 x 2 29.5 x 3.0
GE HMOK 42 AJ 20 1.5/8" -12 UN 50 50 M 42 x 2 38.0 x 3.0
GE HMOK 48 AJ 24 1.7/8" -12 UN 60 60 M 48 x 2 44.0 x 3.0
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.