GE HMO L HJ

Screw-in socket, long

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 UN/UNF external threads
Construction straight
Design Screw-in socket, long
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name L1 mm L2 mm G2 OR L3 mm AF mm G1
Product Name L1 mm L2 mm G2 OR L3 mm AF mm G1
GE HMO L 10 HJ 04 51.0 9.0 7/16"-20 UNF 8.00 x 1.50 35 15 M 10 x 1
GE HMO L 10 HJ 05 53.0 9.0 1/2"-20 UNF 8.00 x 1.50 37 15 M 10 x 1
GE HMO L 12 HJ 05 55.5 11.0 1/2"-20 UNF 9.30 x 2.40 37 18 M 12 x 1,5
GE HMO L 14 HJ 05 56.5 11.0 1/2"-20 UNF 11.30 x 2.40 37 20 M 14 x 1.5
GE HMO L 14 HJ 06 58.5 11.0 9/16"-18 UNF 11.30 x 2.40 39 20 M 14 x 1.5
GE HMO L 16 HJ 06 60.0 12.5 9/16"-18 UNF 13.30 x 2.40 39 23 M 16 x 1.5
GE HMO L 16 HJ 08 69.0 12.5 3/4" -16 UNF 13.30 x 2.40 48 23 M 16 x 1.5
GE HMO L 18 HJ 08 70.5 13.5 3/4" -16 UNF 15.30 x 2.40 48 25 M 18 x 1.5
GE HMO L 18 HJ 10 75.5 13.5 7/8" -14 UNF 15.30 x 2.40 53 25 M 18 x 1.5
GE HMO L 22 HJ 10 78.0 15.0 7/8" -14 UNF 19.30 x 2.40 53 28 M 22 x 1.5
GE HMO L 22 HJ 12 89.0 15.0 1.1/16" -12 UN 19.30 x 2.40 63 28 M 22 x 1.5
GE HMO L 27 HJ 12 92.5 18.5 1.1/16" -12 UN 23.47 x 2.95 63 32 M 27 x 2
GE HMO L 27 HJ 16 102.0 18.5 1.5/16" -12 UN 23.47 x 2.95 72 32 M 27 x 2
GE HMO L 33 HJ 16 102.5 18.5 1.5/16" -12 UN 29.74 x 2.95 72 42 M 33 x 2
GE HMO L 42 HJ 20 121.0 19.0 1.5/8" -12 UN 38.00 x 3.00 88 50 M 42 x 2
GE HMO L 48 HJ 24 136.0 22.0 1.7/8" -12 UN 44.04 x 3.00 98 56 M 48 x 2
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.