You are here:

Back to overview « Back to overview

GE HN AB

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 BSP nut thread
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 60° inner cone
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1
Product Name G2 S1 AF mm G1
GE HN 04 AB G 1/4" -19 19 16 1/4" -18 NPT
GE HN 04 AB 06 G 3/8" -19 22 18 1/4" -18 NPT
GE HN 06 AB 04 G 1/4" -19 19 21 3/8" -18 NPT
GE HN 06 AB G 3/8" -19 22 22 3/8" -18 NPT
GE HN 06 AB 08 G 1/2" -14 22 25 3/8" -18 NPT
GE HN 08 AB 06 G 3/8" -19 22 22 1/2" -14 NPT
GE HN 08 AB G 1/2" -14 27 25 1/2" -14 NPT
GE HN 08 AB 10 G 5/8" -14 30 27 1/2" -14 NPT
GE HN 12 AB 08 G 1/2" -14 27 33 3/4" -14 NPT
GE HN 12 AB G 3/4" -14 32 33 3/4" -14 NPT
GE HN 16 AB G 1" -11 41 38 1" -11.5 NPT
GE HN 16 AB 12 G 3/4" -14 32 35 1" -11.5 NPT
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.

SSL
© HANSA-FLEX 2019