GE HN AJ VA

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 UN/UNF nut threads
Construction straight
Design Screw-in sockets
Material Stainless steel
Sealing form 1 thread seal
Sealing form 2 74° inner cone

Article Table

Product Name G2 S1 AF mm G1
Product Name G2 S1 AF mm G1
GE HN 02 AJ 04 VA 7/16"-20 UNF 14 14 1/8" -27 NPT
GE HN 02 AJ 05 VA 1/2"-20 UNF 17 14 1/8" -27 NPT
GE HN 02 AJ 06 VA 9/16"-18 UNF 14 17 1/8" -27 NPT
GE HN 04 AJ VA 7/16"-20 UNF 14 14 1/4" -18 NPT
GE HN 04 AJ 05 VA 1/2"-20 UNF 16 16 1/4" -18 NPT
GE HN 04 AJ 06 VA 9/16"-18 UNF 17 17 1/4" -18 NPT
GE HN 04 AJ 08 VA 3/4" -16 UNF 22 19 1/4" -18 NPT
GE HN 06 AJ 04 VA 7/16"-20 UNF 14 19 3/8" -18 NPT
GE HN 06 AJ 05 VA 1/2"-20 UNF 17 19 3/8" -18 NPT
GE HN 06 AJ VA 9/16"-18 UNF 17 19 3/8" -18 NPT
GE HN 06 AJ 08 VA 3/4" -16 UNF 22 22 3/8" -18 NPT
GE HN 06 AJ 10 VA 7/8" -14 UNF 27 22 3/8" -18 NPT
GE HN 08 AJ 06 VA 9/16"-18 UNF 19 25 1/2" -14 NPT
GE HN 08 AJ VA 3/4" -16 UNF 22 22 1/2" -14 NPT
GE HN 08 AJ 10 VA 7/8" -14 UNF 25 25 1/2" -14 NPT
GE HN 08 AJ 12 VA 1.1/16" -12 UN 32 27 1/2" -14 NPT
GE HN 12 AJ 08 VA 3/4" -16 UNF 22 27 3/4" -14 NPT
GE HN 12 AJ 10 VA 7/8" -14 UNF 27 32 3/4" -14 NPT
GE HN 12 AJ VA 1.1/16" -12 UN 32 27 3/4" -14 NPT
GE HN 12 AJ 16 VA 1.5/16" -12 UN 38 32 3/4" -14 NPT
GE HN 16 AJ 12 VA 1.1/16" -12 UN 38 27 1" -11.5 NPT
GE HN 16 AJ VA 1.5/16" -12 UN 38 36 1" -11.5 NPT
GE HN 20 AJ VA 1.5/8" -12 UN 50 46 1.1/4" -11.5 NPT
GE HN 24 AJ VA 1.7/8" -12 UN 58 58 1.1/2" -11.5 NPT
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.