GE HN HJOF

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 ORFS external threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name G2 SW mm G1 OR
Product Name G2 SW mm G1 OR
GEHN02HJOF04 9/16"-18 UNF 16 mm 1/8" -27 NPT 7.65 x 1.78
GEHN04HJOF 9/16"-18 UNF 16 mm 1/4" -18 NPT 7.65 x 1.78
GEHN04HJOF06 11/16" -16 UN 19 mm 1/4" -18 NPT 9.25 x 1.78
GEHN06HJOF 11/16" -16 UN 19 mm 3/8" -18 NPT 9.25 x 1.78
GEHN06HJOF08 13/16" -16 UN 22 mm 3/8" -18 NPT 12.42 x 1.78
GEHN08HJOF06 11/16" -16 UN 22 mm 1/2" -14 NPT 9.25 x 1.78
GEHN08HJOF 13/16" -16 UN 22 mm 1/2" -14 NPT 12.42 x 1.78
GEHN08HJOF10 1" -14 UNS 27 mm 1/2" -14 NPT 15.60 x 1.78
GEHN12HJOF08 13/16" -16 UN 29 mm 3/4" -14 NPT 12.42 x 1.78
GEHN12HJOF10 1" -14 UNS 29 mm 3/4" -14 NPT 15.60 x 1.78
GEHN12HJOF 1.3/16" -12 UN 32 mm 3/4" -14 NPT 18.77 x 1.78
GEHN12HJOF16 1.7/16" -12 UN 38 mm 3/4" -14 NPT 23.52 x 1.78
GEHN16HJOF12 1.3/16" -12 UN 35 mm 1" -11.5 NPT 18.77 x 1.78
GEHN16HJOF 1.7/16" -12 UN 38 mm 1" -11.5 NPT 23.52 x 1.78
GEHN20HJOF 1.11/16" -12 UN 48 mm 1.1/4" -11.5 NPT 29.87 x 1.78
GEHN24HJOF 2" -12 UN 54 mm 1.1/2" -11.5 NPT 37.82 x 1.78
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.