GE HN HJ VA

Screw-in sockets



Properties

Connection 1 NPT external threads
Connection 2 UN/UNF external threads
Design Screw-in sockets
Construction straight
Sealing form 1 thread seal
Sealing form 2 74° outer cone
Material Stainless steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
GE HN 02 HJ 04 VA 1/8" -27 NPT 7/16"-20 UNF 13
GE HN 02 HJ 05 VA 1/8" -27 NPT 1/2"-20 UNF 14
GE HN 02 HJ 06 VA 1/8" -27 NPT 9/16"-18 UNF 16
GE HN 04 HJ VA 1/4" -18 NPT 7/16"-20 UNF 14
GE HN 04 HJ 05 VA 1/4" -18 NPT 1/2"-20 UNF 14
GE HN 04 HJ 06 VA 1/4" -18 NPT 9/16"-18 UNF 16
GE HN 04 HJ 08 VA 1/4" -18 NPT 3/4"-16 UNF 19
GE HN 06 HJ VA 3/8" -18 NPT 9/16"-18 UNF 19
GE HN 06 HJ 04 VA 3/8" -18 NPT 7/16"-20 UNF 19
GE HN 06 HJ 05 VA 3/8" -18 NPT 1/2"-20 UNF 19
GE HN 06 HJ 08 VA 3/8" -18 NPT 3/4"-16 UNF 19
GE HN 06 HJ 10 VA 3/8" -18 NPT 7/8"-14 UNF 24
GE HN 08 HJ 04 VA 1/2" -14 NPT 7/16"-20 UNF 22
GE HN 08 HJ 06 VA 1/2" -14 NPT 9/16"-18 UNF 22
GE HN 08 HJ VA 1/2" -14 NPT 3/4"-16 UNF 22
GE HN 08 HJ 10 VA 1/2" -14 NPT 7/8"-14 UNF 24
GE HN 08 HJ 12 VA 1/2" -14 NPT 1.1/16" -12 UN 27
GE HN 08 HJ 16 VA 1/2" -14 NPT 1.5/16" -12 UN 35
GE HN 12 HJ 08 VA 3/4" -14 NPT 3/4"-16 UNF 27
GE HN 12 HJ 10 VA 3/4" -14 NPT 7/8"-14 UNF 27
GE HN 12 HJ VA 3/4" -14 NPT 1.1/16" -12 UN 27
GE HN 12 HJ 16 VA 3/4" -14 NPT 1.5/16" -12 UN 36
GE HN 16 HJ VA 1" -11.5 NPT 1.5/16" -12 UN 36
GE HN 16 HJ 12 VA 1" -11.5 NPT 1.1/16" -12 UN 36
GE HN 16 HJ 20 VA 1" -11.5 NPT 1.5/8" -12 UN 46
GE HN 20 HJ 16 VA 1.1/4" -11.5 NPT 1.5/16" -12 UN 46
GE HN 20 HJ VA 1.1/4" -11.5 NPT 1.5/8" -12 UN 46
GE HN 20 HJ 24 VA 1.1/4" -11.5 NPT 1.7/8" -12 UN 50
GE HN 24 HJ 20 VA 1.1/2" -11.5 NPT 1.5/8" -12 UN 50
GE HN 24 HJ VA 1.1/2" -11.5 NPT 1.7/8" -12 UN 50
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.