GE HRED AJ

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF nut threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 Shape E
Sealing form 2 74° inner cone
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1
Product Name G2 S1 AF mm G1
GE HRED 02 AJ 04 7/16"-20 UNF 14 14 G 1/8" -28
GE HRED 02 AJ 05 1/2"-20 UNF 17 14 G 1/8" -28
GE HRED 04 AJ 05 1/2"-20 UNF 17 19 G 1/4" -19
GE HRED 04 AJ 06 9/16"-18 UNF 19 19 G 1/4" -19
GE HRED 04 AJ 08 3/4" -16 UNF 22 19 G 1/4" -19
GE HRED 06 AJ 9/16"-18 UNF 19 22 G 3/8" -19
GE HRED 06 AJ 08 3/4" -16 UNF 22 22 G 3/8" -19
GE HRED 06 AJ 10 7/8" -14 UNF 27 27 G 3/8" -19
GE HR ED 08 AJ 3/4" -16 UNF 22 27 G 1/2" -14
GE HRED 08 AJ 10 7/8" -14 UNF 27 27 G 1/2" -14
GE HRED 08 AJ 12 1.1/16" -12 UN 32 27 G 1/2" -14
GE HRED 12 AJ 1.1/16" -12 UN 32 32 G 3/4" -14
GE HRED 12 AJ 16 1.5/16" -12 UN 41 32 G 3/4" -14
GE HRED 16 AJ 1.5/16" -12 UN 41 41 G 1" -11
GE HRED 16 AJ 20 1.5/8" -12 UN 50 41 G 1" -11
GE HRED 20 AJ 1.5/8" -12 UN 50 50 G 1.1/4" -11
GE HRED 20 AJ 24 1.7/8" -12 UN 60 50 G 1.1/4" -11
GE HRED 24 AJ 1.7/8" -12 UN 60 55 G 1.1/2" -11
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.