GE HRK AJ

Screw-in sockets



Properties

Connection 1 BSPT conical external threads
Connection 2 UN/UNF nut threads
Design Screw-in sockets
Construction straight
Sealing form 1 thread seal
Sealing form 2 74° inner cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1
Product Name G1 G2 AF mm S1
GE HRK 02 AJ 04 R 1/8" K 7/16"-20 UNF 13 16
GE HRK 02 AJ 05 R 1/8" K 1/2"-20 UNF 13 17
GE HRK 04 AJ R 1/4" K 7/16"-20 UNF 14 16
GE HRK 04 AJ 05 R 1/4" K 1/2"-20 UNF 14 17
GE HRK 04 AJ 06 R 1/4" K 9/16"-18 UNF 14 19
GE HRK 04 AJ 08 R 1/4" K 3/4"-16 UNF 19 22
GE HRK 06 AJ 05 R 3/8" K 1/2"-20 UNF 19 17
GE HRK 06 AJ R 3/8" K 9/16"-18 UNF 19 19
GE HRK 06 AJ 08 R 3/8" K 3/4"-16 UNF 19 22
GE HRK 06 AJ 10 R 3/8" K 7/8"-14 UNF 22 27
GE HRK 08 AJ R 1/2" K 3/4"-16 UNF 27 32
GE HRK 08 AJ 10 R 1/2" K 7/8"-14 UNF 22 27
GE HRK 08 AJ 12 R 1/2" K 1.1/16" -12 UN 27 32
GE HRK 12 AJ 10 R 3/4" K 7/8"-14 UNF 27 27
GE HRK 12 AJ R 3/4" K 1.1/16" -12 UN 27 32
GE HRK 12 AJ 14 R 3/4" K 1.3/16" -12 UN 27 32
GE HRK 12 AJ 16 R 3/4" K 1.5/16" -12 UN 32 38
GE HRK 16 AJ R 1" K 1.5/16" -12 UN 36 38
GE HRK 16 AJ 12 R 1" K 1.1/16" -12 UN 36 38
GE HRK 20 AJ R 1.1/4" K 1.5/8" -12 UN 46 50
GE HRK 24 AJ R 1.1/2" K 1.7/8" -12 UN 54 55
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.