GE HRK HJ

Screw-in sockets



Properties

Connection 1 BSPT conical external threads
Connection 2 UN/UNF external threads
Design Screw-in sockets
Construction straight
Sealing form 1 thread seal
Sealing form 2 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
GE HRK 02 HJ 04 R 1/8" K 7/16"-20 UNF 14
GE HRK 02 HJ 05 R 1/8" K 1/2"-20 UNF 14
GE HRK 04 HJ R 1/4" K 7/16"-20 UNF 14
GE HRK 04 HJ 05 R 1/4" K 1/2"-20 UNF 14
GE HRK 04 HJ 06 R 1/4" K 9/16"-18 UNF 19
GE HRK 04 HJ 08 R 1/4" K 3/4"-16 UNF 22
GE HRK 06 HJ 04 R 3/8" K 7/16"-20 UNF 19
GE HRK 06 HJ 05 R 3/8" K 1/2"-20 UNF 19
GE HRK 06 HJ R 3/8" K 9/16"-18 UNF 19
GE HRK 06 HJ 08 R 3/8" K 3/4"-16 UNF 22
GE HRK 06 HJ 10 R 3/8" K 7/8"-14 UNF 24
GE HRK 06 HJ 12 R 3/8" K 1.1/16" -12 UN 27
GE HRK 08 HJ 06 R 1/2" K 9/16"-18 UNF 22
GE HRK 08 HJ R 1/2" K 3/4"-16 UNF 22
GE HRK 08 HJ 10 R 1/2" K 7/8"-14 UNF 24
GE HRK 08 HJ 12 R 1/2" K 1.1/16" -12 UN 27
GE HRK 08 HJ 16 R 1/2" K 1.5/16" -12 UN 36
GE HRK 10 HJ R 5/8" K 7/8"-14 UNF 24
GE HRK 12 HJ 06 R 3/4" K 9/16"-18 UNF 27
GE HRK 12 HJ 08 R 3/4" K 3/4"-16 UNF 27
GE HRK 12 HJ 10 R 3/4" K 7/8"-14 UNF 27
GE HRK 12 HJ R 3/4" K 1.1/16" -12 UN 27
GE HRK 12 HJ 16 R 3/4" K 1.5/16" -12 UN 36
GE HRK 12 HJ 20 R 3/4" K 1.5/8" -12 UN 46
GE HRK 16 HJ 08 R 1" K 3/4"-16 UNF 36
GE HRK 16 HJ 10 R 1" K 7/8"-14 UNF 36
GE HRK 16 HJ 12 R 1" K 1.1/16" -12 UN 36
GE HRK 16 HJ R 1" K 1.5/16" -12 UN 36
GE HRK 16 HJ 20 R 1" K 1.5/8" -12 UN 46
GE HRK 20 HJ 12 R 1.1/4" K 1.1/16" -12 UN 46
GE HRK 20 HJ 16 R 1.1/4" K 1.5/16" -12 UN 46
GE HRK 20 HJ R 1.1/4" K 1.5/8" -12 UN 46
GE HRK 20 HJ 24 R 1.1/4" K 1.7/8" -12 UN 50
GE HRK 24 HJ 16 R 1.1/2" K 1.5/16" -12 UN 50
GE HRK 24 HJ 20 R 1.1/2" K 1.5/8" -12 UN 50
GE HRK 24 HJ R 1.1/2" K 1.7/8" -12 UN 50
GE HRK 24 HJ 32 R 1.1/2" K 2.1/2" -12 UN 65
GE HRK 32 HJ R 2" K 2.1/2" -12 UN 65
GE HRK 40 HJ R 2.1/2" K 3" -11 UN 70
GE HRK 48 HJ R 3" K 3.1/2" -11 UN 80
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.