GE HRK IR

Screw-in sockets



Properties

Connection 1 BSPT conical external threads
Connection 2 BSP cylindrical internal threads
Design Screw-in sockets
Construction straight
Sealing form 1 thread seal
Sealing form 2 Flat seal
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
GE HRK 02 IR 04 R 1/8" K G 1/4" -19 19
GE HRK 02 IR 06 R 1/8" K G 3/8" -19 22
GE HRK 02 IR 08 R 1/8" K G 1/2" -14 27
GE HRK 04 IR 02 R 1/4" K G 1/8" -28 14
GE HRK 04 IR R 1/4" K G 1/4" -19 19
GE HRK 04 IR 06 R 1/4" K G 3/8" -19 22
GE HRK 04 IR 08 R 1/4" K G 1/2" -14 27
GE HRK 06 IR 02 R 3/8" K G 1/8" -28 19
GE HRK 06 IR 04 R 3/8" K G 1/4" -19 19
GE HRK 06 IR R 3/8" K G 3/8" -19 22
GE HRK 06 IR 08 R 3/8" K G 1/2" -14 27
GE HRK 08 IR 04 R 1/2" K G 1/4" -19 22
GE HRK 08 IR 06 R 1/2" K G 3/8" -19 22
GE HRK 08 IR R 1/2" K G 1/2" -14 27
GE HRK 08 IR 12 R 1/2" K G 3/4" -14 36
GE HRK 08 IR 16 R 1/2" K G 1" -11 41
GE HRK 12 IR 04 R 3/4" K G 1/4" -19 27
GE HRK 12 IR 06 R 3/4" K G 3/8" -19 27
GE HRK 12 IR 08 R 3/4" K G 1/2" -14 27
GE HRK 12 IR R 3/4" K G 3/4" -14 32
GE HRK 12 IR 16 R 3/4" K G 1" -11 41
GE HRK 16 IR 08 R 1" K G 1/2" -14 36
GE HRK 16 IR 12 R 1" K G 3/4" -14 36
GE HRK 16 IR R 1" K G 1" -11 41
GE HRK 16 IR 20 R 1" K G 1.1/4" -11 50
GE HRK 20 IR 08 R 1.1/4" K G 1/2" -14 50
GE HRK 20 IR 12 R 1.1/4" K G 3/4" -14 50
GE HRK 20 IR 16 R 1.1/4" K G 1" -11 50
GE HRK 20 IR 24 R 1.1/4" K G 1.1/2" -11 55
GE HRK 24 IR 16 R 1.1/2" K G 1" -11 55
GE HRK 24 IR 20 R 1.1/2" K G 1.1/4" -11 55
GE HRK 24 IR 32 R 1.1/2" K G 2" -11 70
GE HRK 32 IR 20 R 2" K G 1.1/4" -11 70
GE HRK 32 IR 24 R 2" K G 1.1/2" -11 70
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.