GE HRO AJ

Screw-in sockets



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF nut threads
Design Screw-in sockets
Construction straight
Sealing form 1 form G
Sealing form 2 74° inner cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1 OR
Product Name G1 G2 AF mm S1 OR
GE HRO 02 AJ 04 G 1/8" -28 7/16"-20 UNF 16 16 8.00 x 2.00
GE HRO 04 AJ G 1/4" -19 7/16"-20 UNF 20 16 10.77 x 2.62
GE HRO 04 AJ 05 G 1/4" -19 1/2"-20 UNF 20 17 10.77 x 2.62
GE HRO 04 AJ 08 G 1/4" -19 3/4"-16 UNF 20 22 10.77 x 2.62
GE HRO 06 AJ 04 G 3/8" -19 7/16"-20 UNF 24 16 13.94 x 2.62
GE HRO 06 AJ 05 G 3/8" -19 1/2"-20 UNF 24 17 13.94 x 2.62
GE HRO 06 AJ G 3/8" -19 9/16"-18 UNF 24 19 13.94 x 2.62
GE HRO 06 AJ 08 G 3/8" -19 3/4"-16 UNF 24 22 13.94 x 2.62
GE HRO 06 AJ 10 G 3/8" -19 7/8"-14 UNF 24 27 13.94 x 2.62
GE HRO 08 AJ 06 G 1/2" -14 9/16"-18 UNF 28 19 17.86 x 2.62
GE HRO 08 AJ G 1/2" -14 3/4"-16 UNF 28 22 17.86 x 2.62
GE HRO 08 AJ 10 G 1/2" -14 7/8"-14 UNF 28 27 17.86 x 2.62
GE HRO 08 AJ 12 G 1/2" -14 1.1/16" -12 UN 28 32 17.86 x 2.62
GE HRO 12 AJ 10 G 3/4" -14 7/8"-14 UNF 35 27 23.47 x 2.62
GE HRO 12 AJ 16 G 3/4" -14 1.5/16" -12 UN 35 38 23.47 x 2.62
GE HRO 16 AJ 12 G 1" -11 1.1/16" -12 UN 43 32 29.74 x 3.53
GE HRO 16 AJ 20 G 1" -11 1.5/8" -12 UN 43 50 29.74 x 3.53
GE HRO 20 AJ 16 G 1.1/4" -11 1.5/16" -12 UN 52 38 37.69 x 3.53
GE HRO 20 AJ 24 G 1.1/4" -11 1.7/8" -12 UN 52 58 37.69 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.