GE HRO HB

Screw-in sockets



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP cylindrical external threads
Design Screw-in sockets
Construction straight
Sealing form 1 form G
Sealing form 2 60° inner cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm OR
Product Name G1 G2 AF mm OR
GE HRO 02 HB G 1/8" -28 G 1/8" -28 20 7.65 x 1.78
GE HRO 04 HB 02 G 1/4" -19 G 1/8" -28 20 10.78 x 2.62
GE HRO 04 HB G 1/4" -19 G 1/4" -19 20 10.78 x 2.62
GE HRO 04 HB 06 G 1/4" -19 G 3/8" -19 24 10.78 x 2.62
GE HRO 06 HB 04 G 3/8" -19 G 1/4" -19 24 13.94 x 2.62
GE HRO 06 HB G 3/8" -19 G 3/8" -19 24 13.94 x 2.62
GE HRO 06 HB 08 G 3/8" -19 G 1/2" -14 29 13.94 x 2.62
GE HRO 08 HB 06 G 1/2" -14 G 3/8" -19 29 17.86 x 2.62
GE HRO 08 HB G 1/2" -14 G 1/2" -14 28 17.86 x 2.62
GE HRO 08 HB 10 G 1/2" -14 G 5/8" -14 29 17.86 x 2.62
GE HRO 08 HB 12 G 1/2" -14 G 3/4" -14 29 17.86 x 2.62
GE HRO 12 HB 08 G 3/4" -14 G 1/2" -14 35 23.47 x 2.62
GE HRO 12 HB G 3/4" -14 G 3/4" -14 35 23.47 x 2.62
GE HRO 12 HB 16 G 3/4" -14 G 1" -11 43 23.47 x 2.62
GE HRO 16 HB 12 G 1" -11 G 3/4" -14 43 29.74 x 3.53
GE HRO 16 HB G 1" -11 G 1" -11 43 29.74 x 3.53
GE HRO 20 HB 16 G 1.1/4" -11 G 1" -11 53 37.69 x 3.53
GE HRO 20 HB G 1.1/4" -11 G 1.1/4" -11 53 37.69 x 3.53
GE HRO 24 HB G 1.1/2" -11 G 1.1/2" -11 58 44.04 x 3.53
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.