GE HRO HJ

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 form G
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 AF mm G1 OR
Product Name G2 AF mm G1 OR
GE HRO 02 HJ 04 7/16"-20 UNF 16 G 1/8" -28 7.65 x 1.78
GE HRO 02 HJ 05 1/2"-20 UNF 16 G 1/8" -28 7.65 x 1.78
GE HRO 04 HJ 7/16"-20 UNF 19 G 1/4" -19 10.78 x 2.62
GE HRO 04 HJ 05 1/2"-20 UNF 19 G 1/4" -19 10.78 x 2.62
GE HRO 04 HJ 06 9/16"-18 UNF 19 G 1/4" -19 10.78 x 2.62
GE HRO 04 HJ 08 3/4" -16 UNF 19 G 1/4" -19 10.78 x 2.62
GE HRO 06 HJ 04 7/16"-20 UNF 24 G 3/8" -19 13.94 x 2.62
GE HRO 06 HJ 05 1/2"-20 UNF 24 G 3/8" -19 13.94 x 2.62
GE HRO 06 HJ 9/16"-18 UNF 24 G 3/8" -19 13.94 x 2.62
GE HRO 06 HJ 08 3/4" -16 UNF 24 G 3/8" -19 13.94 x 2.62
GE HRO 06 HJ 10 7/8" -14 UNF 24 G 3/8" -19 13.94 x 2.62
GE HRO 08 HJ 04 7/16"-20 UNF 28 G 1/2" -14 17.86 x 2.62
GE HRO 08 HJ 06 9/16"-18 UNF 28 G 1/2" -14 17.86 x 2.62
GE HRO 08 HJ 3/4" -16 UNF 28 G 1/2" -14 17.86 x 2.62
GE HRO 08 HJ 10 7/8" -14 UNF 28 G 1/2" -14 17.86 x 2.62
GE HRO 08 HJ 12 1.1/16" -12 UN 28 G 1/2" -14 17.86 x 2.62
GE HRO 12 HJ 08 3/4" -16 UNF 35 G 3/4" -14 23.47 x 2.62
GE HRO 12 HJ 1.1/16" -12 UN 35 G 3/4" -14 23.47 x 2.62
GE HRO 12 HJ 14 1.3/16" -12 UN 35 G 3/4" -14 23.47 x 2.62
GE HRO 12 HJ 16 1.5/16" -12 UN 35 G 3/4" -14 23.47 x 2.62
GE HRO 16 HJ 12 1.1/16" -12 UN 43 G 1" -11 29.74 x 3.53
GE HRO 16 HJ 1.5/16" -12 UN 43 G 1" -11 29.74 x 3.53
GE HRO 16 HJ 20 1.5/8" -12 UN 43 G 1" -11 29.74 x 3.53
GE HRO 20 HJ 16 1.5/16" -12 UN 52 G 1.1/4" -11 37.69 x 3.53
GE HRO 20 HJ 1.5/8" -12 UN 52 G 1.1/4" -11 37.69 x 3.53
GE HRO 20 HJ 24 1.7/8" -12 UN 52 G 1.1/4" -11 37.69 x 3.53
GE HRO 24 HJ 1.7/8" -12 UN 58 G 1.1/2" -11 44.04 x 3.53
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.