GE HROK AJ

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF nut threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 O-ring and spacer diaphragm ring
Sealing form 2 74° inner cone
Surface electro galvanised

Article Table

Product Name G2 Operating pressure S1 AF mm G1 OR
Product Name G2 Operating pressure S1 AF mm G1 OR
GE HROK 02 AJ 04 7/16"-20 UNF PN 315 14 16 G 1/8" -28 7.97 x 1.88
GE HROK 02 AJ 05 1/2"-20 UNF PN 315 17 16 G 1/8" -28 7.97 x 1.88
GE HROK 04 AJ 7/16"-20 UNF PN 315 14 19 G 1/4" -19 10.77 x 2.62
GE HROK 04 AJ 05 1/2"-20 UNF PN 315 17 19 G 1/4" -19 10.77 x 2.62
GE HROK 04 AJ 06 9/16"-18 UNF PN 250 19 19 G 1/4" -19 10.77 x 2.62
GE HROK 04 AJ 08 3/4" -16 UNF PN 250 22 19 G 1/4" -19 10.77 x 2.62
GE HROK 06 AJ 04 7/16"-20 UNF PN 315 14 22 G 3/8" -19 13.94 x 2.62
GE HROK 06 AJ 05 1/2"-20 UNF PN 315 17 22 G 3/8" -19 13.94 x 2.62
GE HROK 06 AJ 9/16"-18 UNF PN 250 19 22 G 3/8" -19 13.94 x 2.62
GE HROK 06 AJ 08 3/4" -16 UNF PN 250 22 22 G 3/8" -19 13.94 x 2.62
GE HROK 06 AJ 10 7/8" -14 UNF PN 200 27 22 G 3/8" -19 13.94 x 2.62
GE HROK 08 AJ 06 9/16"-18 UNF PN 250 19 30 G 1/2" -14 17.86 x 2.62
GE HROK 08 AJ 3/4" -16 UNF PN 250 22 30 G 1/2" -14 17.86 x 2.62
GE HROK 08 AJ 10 7/8" -14 UNF PN 200 27 30 G 1/2" -14 17.86 x 2.62
GE HROK 08 AJ 12 1.1/16" -12 UN PN 200 32 30 G 1/2" -14 17.86 x 2.62
GE HROK 12 AJ 10 7/8" -14 UNF PN 200 27 36 G 3/4" -14 23.47 x 2.62
GE HROK 12 AJ 1.1/16" -12 UN PN 200 32 36 G 3/4" -14 23.47 x 2.62
GE HROK 12 AJ 16 1.5/16" -12 UN PN 160 41 36 G 3/4" -14 23.47 x 2.62
GE HROK 16 AJ 12 1.1/16" -12 UN PN 200 32 46 G 1" -11 29.74 x 3.53
GE HROK 16 AJ 1.5/16" -12 UN PN 160 41 46 G 1" -11 29.74 x 3.53
GE HROK 16 AJ 20 1.5/8" -12 UN PN 125 50 46 G 1" -11 29.74 x 3.53
GE HROK 20 AJ 16 1.5/16" -12 UN PN 160 41 50 G 1.1/4" -11 37.69 x 3.53
GE HROK 20 AJ 1.5/8" -12 UN PN 125 50 50 G 1.1/4" -11 37.69 x 3.53
GE HROK 20 AJ 24 1.7/8" -12 UN PN 100 60 50 G 1.1/4" -11 37.69 x 3.53
GE HROK 24 AJ 1.7/8" -12 UN PN 100 60 55 G 1.1/2" -11 44.04 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.