GE HROK AOB

Screw-in sockets



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP nut thread
Design Screw-in sockets
Construction straight
Sealing form 1 Thread socket with O-ring + spacer diaphragm ring
Sealing form 2 60° outer cone with O-ring
Surface electro galvanised
Material Steel

Article Table

Product Name G1 + G2 AF mm S1 OR1 OR2
Product Name G1 + G2 AF mm S1 OR1 OR2
GE HROK 04 AOB G 1/4" -19 20 17 10.77 x 2.62 6.0 x 1.0
GE HROK 06 AOB G 3/8" -19 24 22 13.94 x 2.62 8.1 x 1.6
GE HROK 08 AOB G 1/2" -14 28 27 17.86 x 2.62 12.1 x 1.6
GE HROK 12 AOB G 3/4" -14 35 32 23.47 x 2.62 17.1 x 1.6
GE HROK 16 AOB G 1" -11 43 41 29.75 x 3.53 22.1 x 1.6
GE HROK 20 AOB G 1.1/4" -11 52 50 37.69 x 3.53 29.1 x 1.6
GE HROK 24 AOB G 1.1/2" -11 58 60 44.04 x 3.53 35.1 x 1.6
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.