GF LK

Pump connection (4 hole)



Properties

Design Pump connection (4 hole)
Construction straight
Mounting with metric screw set
Scope of supply with metric screw set and O-ring
Standard ISO/DIS 6164
Surface electro galvanised
Material A 105

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name Series Ø RAD mm Pressure PB bar LK mm A Ø B mm D mm L mm S2 mm S3 mm Screws OR
Product Name Series Ø RAD mm Pressure PB bar LK mm A Ø B mm D mm L mm S2 mm S3 mm Screws OR
GF 35 LK L 10 315 L 10 315 35 M16x1,5 11 39 6,4 30 39,0 (4 x) M 6 x 22 20.0 x 2.5
GF 35 LK L 12 315 L 12 315 35 M18x1,5 11 39 6,4 30 39,0 (4 x) M 6 x 22 20.0 x 2.5
GF 35 LK L 15 250 L 15 250 35 M22x1,5 12 39 6,4 30 38,0 (4 x) M 6 x 22 20.0 x 2.5
GF 40 LK L 15 100 L 15 100 40 M22x1,5 13 42 6,4 35 43,0 (4 x) M 6 x 22 26.0 x 2.5
GF 40 LK L 18 100 L 18 100 40 M26x1,5 16 42 6,4 35 44,0 (4 x) M 6 x 22 26.0 x 2.5
GF 40 LK L 22 100 L 22 100 40 M30x2 20 42 6,4 35 44,5 (4 x) M 6 x 22 26.0 x 2.5
GF 40 LK L 28 100 L 28 100 40 M36x2 20 42 6,4 35 44,5 (4 x) M 6 x 22 26.0 x 2.5
GF 35 LK S 16 315 S 16 315 35 M24x1,5 12 39 6,4 30 39,5 (4 x) M 6 x 22 20.0 x 2.5
GF 55 LK S 20 250 S 20 250 55 M30x2 14 55 8,4 35 51,0 (4 x) M 8 x 25 32.0 x 2.5
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.