GFS STRE (3000 PSI)

SAE welded on counter flange



Properties

Construction type ND 40
Design SAE welded on counter flange
Construction straight
Mounting Inner thread for metric screws
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB 10.9 bar Size Pipe A mm B1 mm B2 mm G mm C mm D mm E mm F mm H mm M metr.
Product Name PB 10.9 bar Size Pipe A mm B1 mm B2 mm G mm C mm D mm E mm F mm H mm M metr.
GFS 80 STRE 21.3 350 1/2" 21.3 x 2.6 22,0 16,0 13 35,0 38,1 54 17,5 46 16,0 M 8
GFS 100 STRE 26.9 350 3/4" 26.9 x 2.6 28,0 21,5 19 35,0 47,6 65 22,2 50 18,0 M 10
GFS 102 STRE 33.7 315 1" 33.7 x 3.2 35,0 27,0 25 38,0 52,4 70 26,2 55 18,0 M 10
GFS 104 STRE 42.4 250 1.1/4" 42.4 x 3.2 43,0 36,0 31 41,0 58,7 79 30,2 68 21,0 M 10
GFS 106 STRE 48.3 200 1.1/2" 48.3 x 3.2 49,0 42,0 38 44,0 69,9 93 35,7 78 25,0 M 12
GFS 108 STRE 48.3 200 2" 48.3 x 3.2 49,0 42,0 42 45,0 77,8 102 42,9 90 25,0 M 12
GFS 108 STRE 60.3 200 2" 60.3 x 3.6 61,0 53,0 49 45,0 77,8 102 42,9 90 25,0 M 12
GFS 110 STRE 60.3 160 2.1/2" 60.3 x 3.6 61,0 53,0 53 50,0 88,9 114 50,8 105 25,0 M 12
GFS 110 STRE 76.1 160 2.1/2" 76.1 x 3.6 77,0 70,0 62 50,0 88,9 114 50,8 105 25,0 M 12
GFS 112 STRE 88.9 138 3" 88.9 x 3.6 90,0 82,0 74 51,0 106,4 134 61,9 124 26,0 M 16
GFS 114 STRE 76.1 35 3.1/2" 76.1 x 3.6 77,0 70,0 70 48,0 120,7 152 69,9 136 26,0 M 16
GFS 114 STRE 88.9 35 3.1/2" 88.9 x 3.6 90,0 82,0 82 48,0 120,7 152 69,9 136 26,0 M 16
GFS 116 STRE 114 35 4" 114.3 x 3.6 115,0 107,0 102 48,0 130,2 162 77,8 146 26,0 M 16
GFS 116 STRE 88.9 35 4" 88.9 x 3.6 90,0 82,0 82 48,0 130,2 162 77,8 146 26,0 M 16
GFS 118 STRE 139 35 5" 139.7 x 4 140,2 131,0 120 50,0 152,4 184 92,1 180 28,0 M 16
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.