G HBED HJ VA

Connection sockets



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Design Connection sockets
Construction straight
Sealing form 1 60° inner cone + shape E
Sealing form 2 74° outer cone
Material Stainless steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
G HBED 02 HJ 04 VA G 1/8" -28 7/16"-20 UNF 14
G HBED 02 HJ 05 VA G 1/8" -28 1/2"-20 UNF 14
G HBED 02 HJ 06 VA G 1/8" -28 9/16"-18 UNF 16
G HBED 04 HJ VA G 1/4" -19 7/16"-20 UNF 19
G HBED 04 HJ 05 VA G 1/4" -19 1/2"-20 UNF 19
G HBED 04 HJ 06 VA G 1/4" -19 9/16"-18 UNF 19
G HBED 04 HJ 08 VA G 1/4" -19 3/4"-16 UNF 19
G HBED 06 HJ 04 VA G 3/8" -19 7/16"-20 UNF 22
G HBED 06 HJ 05 VA G 3/8" -19 1/2"-20 UNF 22
G HBED 06 HJ VA G 3/8" -19 9/16"-18 UNF 22
G HBED 06 HJ 08 VA G 3/8" -19 3/4"-16 UNF 22
G HBED 06 HJ 10 VA G 3/8" -19 7/8"-14 UNF 24
G HBED 08 HJ 04 VA G 1/2" -14 7/16"-20 UNF 27
G HBED 08 HJ 06 VA G 1/2" -14 9/16"-18 UNF 30
G HBED 08 HJ VA G 1/2" -14 3/4"-16 UNF 30
G HBED 08 HJ 10 VA G 1/2" -14 7/8"-14 UNF 30
G HBED 08 HJ 12 VA G 1/2" -14 1.1/16" -12 UN 30
G HBED 12 HJ 08 VA G 3/4" -14 3/4"-16 UNF 36
G HBED 12 HJ 10 VA G 3/4" -14 7/8"-14 UNF 36
G HBED 12 HJ VA G 3/4" -14 1.1/16" -12 UN 36
G HBED 12 HJ 16 VA G 3/4" -14 1.5/16" -12 UN 36
G HBED 16 HJ 10 VA G 1" -11 7/8"-14 UNF 41
G HBED 16 HJ 12 VA G 1" -11 1.1/16" -12 UN 41
G HBED 16 HJ VA G 1" -11 1.5/16" -12 UN 41
G HBED 16 HJ 20 VA G 1" -11 1.5/8" -12 UN 46
G HBED 20 HJ 16 VA G 1.1/4" -11 1.5/16" -12 UN 50
G HBED 20 HJ VA G 1.1/4" -11 1.5/8" -12 UN 50
G HBED 20 HJ 24 VA G 1.1/4" -11 1.7/8" -12 UN 50
G HBED 24 HJ 20 VA G 1.1/2" -11 1.5/8" -12 UN 55
G HBED 24 HJ VA G 1.1/2" -11 1.7/8" -12 UN 55
AF = Width across flats

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.