G HB HJ

Connection sockets



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Design Connection sockets
Construction straight
Sealing form 1 60° inner cone
Sealing form 2 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
G HB 02 HJ 10 G 1/8" -28 7/8"-14 UNF 24
G HB 04 HJ 10 G 1/4" -19 7/8"-14 UNF 24
G HB 08 HJ 05 G 1/2" -14 1/2"-20 UNF 27
G HB 08 HJ 14 G 1/2" -14 1.3/16" -12 UN 32
G HB 08 HJ 16 G 1/2" -14 1.5/16" -12 UN 41
G HB 10 HJ 08 G 5/8" -14 3/4"-16 UNF 27
G HB 10 HJ G 5/8" -14 7/8"-14 UNF 27
G HB 10 HJ 12 G 5/8" -14 1.1/16" -12 UN 32
G HB 10 HJ 16 G 5/8" -14 1.5/16" -12 UN 41
G HB 12 HJ 06 G 3/4" -14 9/16"-18 UNF 32
G HB 12 HJ 14 G 3/4" -14 1.3/16" -12 UN 32
G HB 12 HJ 20 G 3/4" -14 1.5/8" -12 UN 50
G HB 16 HJ 08 G 1" -11 3/4"-16 UNF 41
G HB 16 HJ 10 G 1" -11 7/8"-14 UNF 41
G HB 16 HJ 14 G 1" -11 1.3/16" -12 UN 41
G HB 20 HJ 12 G 1.1/4" -11 1.1/16" -12 UN 50
G HB 24 HJ 16 G 1.1/2" -11 1.5/16" -12 UN 55
G HB 24 HJ 32 G 1.1/2" -11 2.1/2" -12 UN 60
G HB 32 HJ 24 G 2" -11 1.7/8" -12 UN 60
G HB 32 HJ G 2" -11 2.1/2" -12 UN 60
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.