G HJ HJOF

Connection sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF external threads
Connection 2 ORFS external threads
Construction straight
Design Connection sockets
Material Steel
Sealing form 1 74° outer cone
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name G2 SW mm G1 OR
Product Name G2 SW mm G1 OR
GHJ04HJOF 9/16"-18 UNF 16 mm 7/16"-20 UNF 7.65 x 1.78
GHJ05HJOF06 11/16" -16 UN 19 mm 1/2"-20 UNF 9.25 x 1.78
GHJ06HJOF 11/16" -16 UN 19 mm 9/16"-18 UNF 9.25 x 1.78
GHJ08HJOF 13/16" -16 UN 22 mm 3/4" -16 UNF 12.42 x 1.78
GHJ10HJOF 1" -14 UNS 27 mm 7/8" -14 UNF 15.60 x 1.78
GHJ12HJOF 1.3/16" -12 UN 32 mm 1.1/16" -12 UN 18.77 x 1.78
GHJ16HJOF 1.7/16" -12 UN 38 mm 1.5/16" -12 UN 23.52 x 1.78
GHJ20HJOF 1.11/16" -12 UN 45 mm 1.5/8" -12 UN 29.87 x 1.78
GHJ24HJOF 2" -12 UN 54 mm 1.7/8" -12 UN 37.82 x 1.78
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.