G HJOF

Connection sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 ORFS external threads
Connection 2 ORFS external threads
Construction straight
Design Connection sockets
Material Steel
Sealing form 1 flat seal with O-ring
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name OR2 G2 OR1 AF mm G1
Product Name OR2 G2 OR1 AF mm G1
G HJOF 04 7.65 x 1.78 9/16"-18 UNF 7.65 x 1.78 16 9/16"-18 UNF
G HJOF 04 HJOF 06 9.25 x 1.78 11/16" -16 UN 7.65 x 1.78 19 9/16"-18 UNF
G HJOF 06 9.25 x 1.78 11/16" -16 UN 9.25 x 1.78 19 11/16" -16 UN
G HJOF 06 HJOF 08 12.42 x 1.78 13/16" -16 UN 9.25 x 1.78 22 11/16" -16 UN
G HJOF 08 12.42 x 1.78 13/16" -16 UN 12.42 x 1.78 22 13/16" -16 UN
G HJOF 08 HJOF 10 15.60 x 1.78 1" -14 UNS 12.42 x 1.78 27 13/16" -16 UN
G HJOF 10 15.60 x 1.78 1" -14 UNS 15.60 x 1.78 27 1" -14 UNS
G HJOF 10 HJOF 12 18.77 x 1.78 1.3/16" -12 UN 15.60 x 1.78 32 1" -14 UNS
G HJOF 12 18.77 x 1.78 1.3/16" -12 UN 18.77 x 1.78 32 1.3/16" -12 UN
G HJOF 12 HJOF 16 23.52 x 1.78 1.7/16" -12 UN 18.77 x 1.78 41 1.3/16" -12 UN
G HJOF 16 23.52 x 1.78 1.7/16" -12 UN 23.52 x 1.78 38 1.7/16" -12 UN
G HJOF 16 HJOF 20 29.87 x 1.78 1.11/16" -12 UN 23.52 x 1.78 46 1.7/16" -12 UN
G HJOF 20 29.87 x 1.78 1.11/16" -12 UN 29.87 x 1.78 46 1.11/16" -12 UN
G HJOF 24 37.82 x 1.78 2" -12 UN 37.82 x 1.78 55 2" -12 UN
G HJOF 32 48.90 x 2.62 2.1/2" -12 UN 48.90 x 2.62 70 2.1/2" -12 UN
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.