G HRK

Screw-in sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSPT conical external threads
Connection 2 BSPT conical external threads
Construction straight
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 thread seal
Surface electro galvanised

Article Table

Product Name G2 AF mm G1
Product Name G2 AF mm G1
G HRK 02 R 1/8" K 12 R 1/8" K
G 02 HRK 04 R 1/4" K 14 R 1/8" K
G 02 HRK 06 R 3/8" K 17 R 1/8" K
G HRK 04 R 1/4" K 14 R 1/4" K
G 04 HRK 06 R 3/8" K 17 R 1/4" K
G 04 HRK 08 R 1/2" K 22 R 1/4" K
G HRK 06 R 3/8" K 17 R 3/8" K
G 06 HRK 08 R 1/2" K 22 R 3/8" K
G 06 HRK 12 R 3/4" K 27 R 3/8" K
G 06 HRK 16 R 1" K 36 R 3/8" K
G HRK 08 R 1/2" K 22 R 1/2" K
G 08 HRK 10 R 5/8" K 24 R 1/2" K
G 08 HRK 12 R 3/4" K 27 R 1/2" K
G 08 HRK 16 R 1" K 36 R 1/2" K
G HRK 10 R 5/8" K 24 R 5/8" K
G HRK 12 R 3/4" K 27 R 3/4" K
G 12 HRK 16 R 1" K 36 R 3/4" K
G HRK 16 R 1" K 36 R 1" K
G 16 HRK 20 R 1.1/4" K 46 R 1" K
G HRK 20 R 1.1/4" K 46 R 1.1/4" K
G 20 HRK 24 R 1.1/2" K 50 R 1.1/4" K
G HRK 24 R 1.1/2" K 50 R 1.1/2" K
G 24 HRK 32 R 2" K 65 R 1.1/2" K
G HRK 32 R 2" K 65 R 2" K
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.