G IR HJ

Connection sockets



Properties

Connection 1 BSP cylindrical internal threads
Connection 2 UN/UNF external threads
Design Connection sockets
Construction straight
Sealing form 1 flat sealing
Sealing form 2 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
G IR 02 HJ 04 G 1/8" -28 7/16"-20 UNF 16
G IR 02 HJ 05 G 1/8" -28 1/2"-20 UNF 16
G IR 04 HJ G 1/4" -19 7/16"-20 UNF 19
G IR 04 HJ 05 G 1/4" -19 1/2"-20 UNF 19
G IR 04 HJ 06 G 1/4" -19 9/16"-18 UNF 19
G IR 04 HJ 08 G 1/4" -19 3/4"-16 UNF 22
G IR 06 HJ G 3/8" -19 9/16"-18 UNF 22
G IR 06 HJ 08 G 3/8" -19 3/4"-16 UNF 22
G IR 08 HJ 06 G 1/2" -14 9/16"-18 UNF 30
G IR 08 HJ G 1/2" -14 3/4"-16 UNF 30
G IR 08 HJ 10 G 1/2" -14 7/8"-14 UNF 30
G IR 08 HJ 12 G 1/2" -14 1.1/16" -12 UN 30
G IR 12 HJ 08 G 3/4" -14 3/4"-16 UNF 36
G IR 12 HJ G 3/4" -14 1.1/16" -12 UN 36
G IR 12 HJ 14 G 3/4" -14 1.3/16" -12 UN 41
G IR 16 HJ G 1" -11 1.5/16" -12 UN 46
G IR 16 HJ 20 G 1" -11 1.5/8" -12 UN 50
G IR 20 HJ G 1.1/4" -11 1.5/8" -12 UN 50
G IR 20 HJ 24 G 1.1/4" -11 1.7/8" -12 UN 55
G IR 24 HJ G 1.1/2" -11 1.7/8" -12 UN 55
G IR 32 HJ G 2" -11 2.1/2" -12 UN 73
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.