GPS LP

Piston packing set, GPS-LP



Properties

Media Mineral oils
Material (1) Dynamic seal: PUR, (2) Static seal: NBR
Installation on multi-part pistons B, on one-piece pistons A
Operating pressure up to 400 bar

Description

Easy assembly.
Low spatial requirement.
High abrasion resistance.
Extremely good sealing effect.

Hints

Clearance:
Pressure = 50 bar / e max.= 1.20
Pressure = 100 bar / e max.= 0.80
Pressure = 200 bar / e max.= 0.40
Pressure = 300 bar / e max.= 0.25
Pressure= 400 bar / e max.= <0.15
Tolerance: D= H9; d= +0,1/0; L= +0.2/0

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
GPS 35-1-LP 35,00 24,00 4,2
GPS 38-LP 38,00 30,50 3,2
GPS 130-1-LP 130,00 109,00 8,1

Order hints

We are able to produce seals with diameters of 20 to 510 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.