GV 90 H

Rotary fitting, angle 90°, friction bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Construction type Friction bearing
Design Rotary fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 24° inner cone
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm Operating pressure L3 mm External pipe Ø mm S1 AF mm G1 Series Ø d2 mm L4 mm
Product Name L1 mm L2 mm Operating pressure L3 mm External pipe Ø mm S1 AF mm G1 Series Ø d2 mm L4 mm
GV 90 NW 04 HL H 49 31 PN 250 23 6 19 27 M 12 x 1,5 L 6 7.0
GV 90 NW 06 HL H 54 33 PN 250 25 8 22 30 M 14 x 1.5 L 8 7.0
GV 90 NW 08 HL H 57 36 PN 250 27 10 24 32 M 16 x 1.5 L 10 7.0
GV 90 NW 10 HL H 63 39 PN 250 29 12 27 36 M 18 x 1.5 L 12 7.0
GV 90 NW 13 HL H 68 42 PN 250 32 15 32 40 M 22 x 1.5 L 15 7.0
GV 90 NW 16 HL H 75 46 PN 160 34 18 36 45 M 26 x 1.5 L 18 7.5
GV 90 NW 20 HL H 89 54 PN 160 41 22 41 55 M 30 x 2 L 22 7.5
GV 90 NW 25 HL H 103 62 PN 100 46 28 50 65 M 36 x 2 L 28 7.5
GV 90 NW 32 HL H 115 69 PN 100 53 35 55 75 M 45 x 2 L 35 10.5
GV 90 NW 40 HL H 147 90 PN 100 61 42 70 90 M 52 x 2 L 42 11.0
GV 90 NW 03 HS H 51 33 PN 400 25 6 19 27 M 14 x 1.5 S 6 7.0
GV 90 NW 04 HS H 51 33 PN 400 25 8 19 27 M 16 x 1.5 S 8 7.0
GV 90 NW 06 HS H 56 35 PN 400 27 10 22 30 M 18 x 1.5 S 10 7.5
GV 90 NW 08 HS H 58 37 PN 400 28 12 24 32 M 20 x 1.5 S 12 7.5
GV 90 NW 10 HS H 66 42 PN 400 32 14 27 36 M 22 x 1.5 S 14 8.0
GV 90 NW 13 HS H 70 44 PN 400 34 16 32 40 M 24 x 1.5 S 16 8.5
GV 90 NW 16 HS H 79 50 PN 250 38 20 36 45 M 30 x 2 S 20 10.5
GV 90 NW 20 HS H 93 58 PN 250 45 25 41 55 M 36 x 2 S 25 12.0
GV 90 NW 25 HS H 109 68 PN 250 52 30 50 65 M 42 x 2 S 30 13.5
GV 90 NW 32 HS H 121 75 PN 250 59 38 55 75 M 52 x 2 S 38 16.0
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.