G VKS ST 250

Cetop square flange, short stub end

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design Cetop square flange
Material S355J2G3 (ST52.3)
Standard CETOP RP 63H, ISO 6164
Surface black oiled

Article Table

Product Name Druck PB bar E mm D mm A mm Baugröße Ø B mm C mm
Product Name Druck PB bar E mm D mm A mm Baugröße Ø B mm C mm
GVKS38ST250 250 bar 30 mm 18.0 mm 18 mm 3/8" 12.5 mm 24.5 mm
GVKS12ST250 250 bar 30 mm 24.0 mm 22 mm 1/2" 15.0 mm 30.2 mm
GVKS34ST250 250 bar 35 mm 31.5 mm 28 mm 3/4" 20.0 mm 38.1 mm
GVKS1ST250 250 bar 40 mm 38.0 mm 35 mm 1" 25.0 mm 44.4 mm
GVKS114ST250 250 bar 45 mm 43.0 mm 43 mm 1.1/4" 32.0 mm 50.8 mm
GVKS112ST250 250 bar 50 mm 50.0 mm 50 mm 1.1/2" 38.0 mm 60.3 mm
GVKS2ST250 250 bar 60 mm 62.0 mm 62 mm 2" 47.0 mm 71.4 mm
GVKS212ST250 250 bar 70 mm 76.0 mm 76 mm 2.1/2" 58.0 mm 87.2 mm
GVKS3ST250 250 bar 80 mm 90.0 mm 90 mm 3" 70.0 mm 101.6 mm
GVKS312ST250 250 bar 90 mm 102.0 mm 102 mm 3.1/2" 80.0 mm 119.0 mm
GVKS4ST250 250 bar 105 mm 114.0 mm 114 mm 4" 90.0 mm 131.0 mm
PN = Nominal pressure PB = Max. operating pressure, Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.