G VKS ST 400

Cetop square flange, short stub end



Properties

Design Cetop square flange
Construction straight
Standard CETOP RP 63H, ISO 6164
Surface black oiled
Material S355J2G3 (ST52.3)

Article Table

Product Name Pressure PB bar Size A mm Ø B mm C mm D mm E mm
Product Name Pressure PB bar Size A mm Ø B mm C mm D mm E mm
G VKS 38 ST 400 400 3/8" 18 11,0 26,0 18 35
G VKS 12 ST 400 400 1/2" 22 14,0 31,8 24 40
G VKS 34 ST 400 400 3/4" 28 18,0 39,5 32 45
G VKS 1 ST 400 400 1" 35 22,0 47,6 38 50
G VKS 114 ST 400 400 1.1/4" 44 29,0 54,0 44 55
G VKS 112 ST 400 400 1.1/2" 51 35,0 63,5 51 60
G VKS 2 ST 400 400 2" 61 43,0 79,4 67 70
G VKS 212 ST 400 400 2.1/2" 80 53,0 94,2 60 80
G VKS 3 ST 400 400 3" 90 58,0 104,0 90 90
G VKS 312 ST 400 400 3.1/2" 102 63,0 119,0 102 90
G VKS 4 ST 400 400 4" 114 74,0 131,0 114 105
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.