GVM 90

Rotary fitting, angle 90°, friction bearing



Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction type Friction bearing
Design Rotary fitting (screw-in connector)
Construction Angle 90°
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 d3 mm i mm L1 mm L2 mm L4 mm L5 mm AF mm S1 S2
Product Name Series Operating pressure Ø d2 mm G1 d3 mm i mm L1 mm L2 mm L4 mm L5 mm AF mm S1 S2
GVM 90 NW 04 HL 14 L PN 40 6 M 14 x 1.5 19 12 20,0 18,0 27 12,0 12 19 14
GVM 90 NW 08 HL 18 L PN 40 10 M 18 x 1.5 24 12 26,0 18,0 30 15,0 14 24 19
GVM 90 NW 10 HL 22 L PN 40 12 M 22 x 1.5 27 14 27,0 21,0 32 17,0 17 27 22
GVM 90 NW 13 HL 27 L PN 40 15 M 27 x 2 32 16 33,0 24,0 36 21,0 19 32 27
GVM 90 NW 16 HL 33 L PN 40 18 M 33 x 2 40 18 37,5 27,5 40 23,5 27 41 32
GVM 90 NW 20 HL 33 L PN 40 22 M 33 x 2 40 18 39,5 27,5 44 27,5 27 41 36
GVM 90 NW 25 HL 42 L PN 40 28 M 42 x 2 50 20 44,0 31,0 47 30,5 36 50 41
GVM 90 NW 32 HL 48 L PN 40 35 M 48 x 2 55 22 54,0 35,0 56 34,5 41 55 50
GVM 90 NW 03 HS 14 S PN 100 6 M 14 x 1.5 19 12 21,0 18,0 31 16,0 12 19 17
GVM 90 NW 06 HS 18 S PN 100 10 M 18 x 1.5 24 12 27,0 18,0 34 17,5 17 24 22
GVM 90 NW 08 HS S PN 100 12 M 18 x 1.5 27 14 28,0 21,0 38 21,5 17 27 24
GVM 90 NW 08 HS 22 S PN 100 12 M 22 x 1.5 27 14 28,0 32,0 38 21,5 17 27 24
GVM 90 NW 13 HS 27 S PN 100 16 M 27 x 2 32 16 34,0 24,0 43 24,5 24 32 30
GVM 90 NW 16 HS 33 S PN 100 20 M 33 x 2 40 18 39,5 27,5 48 26,5 27 41 36
GVM 90 NW 20 HS S PN 100 25 M 33 x 2 40 18 42,5 27,5 54 30,0 36 41 46
GVM 90 NW 25 HS S PN 100 30 M 42 x 2 50 20 48,0 31,0 62 35,5 41 50 50
GVM 90 NW 32 HS S PN 100 38 M 48 x 2 55 22 55,0 35,0 72 41,0 50 55 60
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.